Separation/degradation behavior and mechanism for cationic/anionic dyes by Ag-functionalized Fe3O4-PDA core-shell adsorbents

● PDA-Fe₃O₄-Ag was made by hydrothermal and oxidation self-polymerization method. ● PDA-Fe₃O₄-Ag had great magnetic separation performance. ● PDA-Fe₃O₄-Ag had good adsorption and degradation performance for ionic dyes. ● PDA-Fe₃O₄-Ag showed NR and MO degradation potential of 91.2% and 87.5%, respectively. High-performance adsorbents have been well-studied for the removal of organic dye pollutants to promote environment remediation. In this study, an Ag nanoparticle-functionalized Fe₃O₄-PDA nanocomposite adsorbent (PDA-Fe₃O₄-Ag) was synthesized, and the adsorption/separation performance of commonly used cationic and anionic organic dyes by the PDA-Fe₃O₄-Ag adsorbent were assessed. Overall, PDA-Fe₃O₄-Ag exhibited a significantly higher adsorption capacity for cationic dyes compared to anionic dyes, the highest of which was more than 110.0 mg/g (methylene blue (MB)), which was much higher than not only the adsorption capacities of the anionic dyes in this study but also other dye adsorption capacities reported in the literature. The dye adsorption kinetics data fitted well to both the pseudo second-order kinetics model and the Langmuir isotherm model, suggesting a monolayer-chemisorption-dominated adsorption mode. Thermodynamics analysis indicated that the adsorption process was both endothermic and spontaneous. Furthermore, the PDA-Fe₃O₄-Ag adsorbent achieved high photodegradation removal rates of the dyes, especially neutral red (NR) and methyl orange (MO), which were 91.2% and 87.5%, respectively. With the addition of PDA-Fe₃O₄-Ag, the degradation rate constants of NR and MO increased from 0.08 × 10^?2 and 0 min^?1 to 2.11 × 10^?2 and 1.73 × 10^?2 min^?1, respectively. The high adsorption and photocatalytic degradation performance of the PDA-Fe₃O₄-Ag adsorbent make it an excellent candidate for removing cationic and anionic dyes from the industrial effluents.