首页 | 本学科首页   官方微博 | 高级检索  
     检索      

气浮装置在化工废水中的应用
引用本文:田博.气浮装置在化工废水中的应用[J].环境保护科学,2010,36(2):11-13,42.
作者姓名:田博
作者单位:辽宁省城市污水处理管理中心,沈阳,110033
基金项目:国家水体污染控制与治理科技重大专项 
摘    要:针对某化工集团废水处理及回用工程采用气浮装置预处理化工废水,研究主要对气浮装置的原理、设计参数、药剂投加等进行实践与探讨。运行结果表明,在稳定运行阶段,可实现进水量2083 m3/h。进水CODcr平均浓度为600 mg/L,SS浓度为220 mg/L,石油类平均浓度为50 mg/L,处理出水CODcr≤490mg/L、SS≤46.2mg/L、石油类≤1mg/L。该工艺处理效果稳定,对悬浮物和石油类处理效果显著。

关 键 词:化工废水  气浮装置  预处理

Application of Floatation Equipment in the Treatment of Petrochemical Wastewater
Abstract:Wastewater treatment and reuse project of a Chemical Industry Group pretreats petrochemical wastewater using floatation equipment. The main principles of floatation equipment, design parameters, pharmaceutical dosing were mainly studied and discussed. The results showed that , after the stable operation stage, the average water inflow is 2083 m3/h. While the average inffluent concentration of CODcr is 600 mg/L, SS is 220mg/L, petroleum is 50mg/L, the effluent indexes are COD≤490 mg/L, SS≤46.2mg/L, petroleum≤1 mg/L. The reactor operates continuously and stably, especially for SS and petroleum removal.
Keywords:Petrochemical Wastewater Floatation Equipment Pretreatrnent
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号