| 利用塑性介质挤胀成形三通管接头变形力的研究 |
| |
| 引用本文： | 王成录,吕炎,刘英伟,张毅.利用塑性介质挤胀成形三通管接头变形力的研究[J].装备环境工程,1998(1). |
| |
| 作者姓名： | 王成录 吕炎 刘英伟 张毅 |
| |
| 作者单位： | 哈尔滨工业大学材料科学与工程学院
(王成录，吕炎，刘英伟)，哈尔滨汽轮机厂(张毅) |
| |
| 摘 要： | 此文对利用塑性介质挤胀成形三通管接头变形力进行了实验研究。设计了一套挤胀成形三通管接头的通用装置,并利用此装置进行了三通挤胀成形实验。此研究给出了影响成形过程的一些重要参数。将理论结果与实验结果进行了对比,两者吻合较好。
|
| 关 键 词： | 挤胀成形 三通管接头 塑性介质 |
Research on the Deformation Force of Extrude-bulge Forming of Tee Junction Using Plastic Medium |
| |
| School of Material Science and Engneering,Harbin Insitute of Technology Wang Chenglu Liu Yingwe Harbing Steam Twibine Factory Zhang Yi.Research on the Deformation Force of Extrude-bulge Forming of Tee Junction Using Plastic Medium[J].Equipment Environmental Engineering,1998(1). |
| |
| Authors: | School of Material Science and Engneering Harbin Insitute of Technology Wang Chenglu Liu Yingwe Harbing Steam Twibine Factory Zhang Yi |
| |
| Abstract: | In this paper,an experimental research on extrude-bulge forming of tee junction using plastic medium has been conducted. A universal device is designed for this study,with the device the forming of tee junction could be done. The research gave some important information about the effects of process parameters on the deformation behavior during the forming process. The results from theoretical analysis were compared with experimental results. There is a reasonable agreement between them. |
| |
| Keywords: | Extrude-bulgy forming Tee junction Plastic medium |
| 本文献已被 CNKI 等数据库收录！ |
