Abstract: | The purpose of this study was to determine the copper (Cu) biosorption capacities of several agricultural wastes from aqueous solutions. Samples of agricultural wastes were tested unaltered and after hydrochloric acid (HCl) treatment. Additional parameters tested include sample dose, contact time, particle size, mixing temperature, and the concentrations and pH of the Cu solutions. Desorption studies were performed to determine if the removed Cu could be recovered. In addition, tests were conducted to determine if the agricultural waste samples (AWS) could be reused for additional Cu biosorption cycles. The results of this study demonstrate a wide range of Cu biosorption proficiencies ranging from 0% to 100% removal. The parameters that resulted in higher Cu removal include higher pH and lower Cu solution concentration. Desorption results showed a 58% to 86% Cu recovery rate. Three of the five reused AWS were effective at removing Cu during subsequent trials. Therefore, these AWS types can be reused for additional Cu biosorption cycles. Hence, it is possible that using those AWS for metal treatment could reduce hazardous waste disposal inefficiencies and costs by avoiding disposing of spent AWS following each Cu biosorption cycle. |