A remote in situ monitor based on continuous flow analysis for the quantitation of sub-micromolar levels of hexavalent chromium in natural waters

We describe the design, optimization, and application of a small, lightweight, deployable monitoring instrument for accurately measuring parts-per-billion levels of hexavalent Cr in surface waters at hourly intervals. The monitor quantifies Cr(vi) using a standard molecular absorbance spectroscopic method, i.e. by formation of a complex with 1,5-diphenylcarbazide (DPC). The continuous flow analysis (CFA) design uses narrow conduits (0.90 mm) that are hot-forged onto poly(methyl methacrylate) ('Plexiglas') plates based on the method of Jannasch et al.(Anal. Chem., 1994, 66, 3352). The sample stream is drawn through the manifold at 25 microl min(-1) using a mini-peristaltic pump; osmotic pumps (10 microl h(-1)) are used to continuously inject reagent (2.0 mM DPC, 0.60 M HNO(3), 5.0% w/v acetone, and 0.10% w/v Brij-35) and to periodically introduce quality control standards and a cleaning solution (0.50 M HNO(3)). The 'Z-type' optical cell uses a liquid-core waveguide (10 mm) to collimate the light-emitting diode source beam (lambda(max) 574 nm) to a broadband photodiode detector. Figures of merit are: 7 min cycle time, response within 28 min and clear-down within 31 min, low waste generation (<40 ml d(-1)), detection limit (3sigma) of 48.4 microg l(-1) as Cr(vi) or 0.411 microM as chromic acid, 1.54% relative standard deviation at 100 microg l(-1), and selectivity for dissolved Cr(vi) in authentic surface water samples containing moderate levels (>0.21% w/v) of total particulate matter. Using a test chamber containing Milwaukee Harbor water that was periodically fortified with Cr(vi) standards, continuous testing over a 15 day period (354 h) yielded results that were in excellent agreement (<5% variation) with measurements made using an ICP-MS reference method. Drift in the calibration model over the test period was 1.23% and the variation in a 0.50 mg l(-1) Cr(vi) standard was 3.8%(n= 11). Known interferences to the DPC chemistry (Mo, V, and Hg at >5 mg l(-1)) were undetected in the harbor water by ICP-MS.