Uncertainty in Nonpoint Source Pollution Models and Associated Risks

The usefulness of water quality simulation models for environmental management is explored with a focus on prediction uncertainty. The specific objective is to demonstrate how the usability of a flow and transport model (here: MACRO) can be enhanced by developing and analyzing its output probability distributions based on input variability. This infiltration-based model was designed to investigate preferential flow effects on pollutant transport. A statistical sensitivity analysis is used to identify the most uncertain input parameters based on model outputs. Probability distribution functions of input variables were determined based on field-measured data obtained under alternative tillage treatments. Uncertainty of model outputs is investigated using a Latin hypercube sampling scheme (LHS) with restricted pairing for model input sampling. Probability density functions (pdfs) are constructed for water flow rate, atrazine leaching rate, total accumulated leaching, and atrazine concentration in percolation water. Results indicate that consideration of input parameter uncertainty produces a 20% higher mean flow rate along with two to three times larger atrazine leaching rate, accumulated leachate, and concentration than that obtained using mean input parameters. Uncertainty in predicted flow rate is small but that in solute transport is an order of magnitude larger than that of corresponding input parameters. Macropore flow is observed to contribute to the variability of atrazine transport results. Overall, the analysis provides a quantification of prediction uncertainty that is found to enhance a user's ability to assess risk levels associated with model predictions.