Chemical Behaviour of Calcium in Stabilized Oil Ash Reef Blocks After Five Years in the Ocean

Reef blocks made from stabilized oil ash were taken from the sea after five years in the ocean to examine the chemical behaviour of calcium. Experiments included (1) determination of the calcium leaching rate and a comparison with the rate for unexposed blocks to test the validity of a diffusion model for predicting long term (5 years) leaching rates, (2) determination of the effect of biological cover (shell) on the leaching rate, (3) determination of the leaching rate of the core of exposed reef blocks, (4) determination of the calcium content in 'ring areas' - regions of discoloration observed in sectioned exposed reef blocks, and (5) determination of the leachable fraction of the total calcium in exposed reef blocks. Results showed the presence of a pronounced calcium discontinuity zone located 3-7 cm from the outside surface of the reef blocks. Cumulated calcium release rates ranged from 2.81-3.14 μmol cm^-2 day^-1 for original unexposed reef blocks and the core of exposed (in the ocean for five years) blocks, respectively, to 0.47-0.50 μmol cm^-2 day^-1 for outside (facing sea water) surfaces of exposed reef blocks. Tank leaching studies also showed that the presence or absence of hard biological cover (shells) had little or no effect on the calcium release rate. the diffusion model normally used in modelling the chemical behaviour of calcium cannot be used to predict the long term (five years) leaching of calcium. the core of the exposed blocks released calcium at a rate similar to new, unexposed reef block material. Overall, it appears that the calcium discontinuity zone is probably responsible for restricting the release of calcium and hence the failure of the diffusion model.