| 带缺口筒形件冲压工艺及模具设计 |
| |
| 引用本文： | 陈为国.带缺口筒形件冲压工艺及模具设计[J].装备环境工程,1998(2). |
| |
| 作者姓名： | 陈为国 |
| |
| 作者单位： | 南昌航空工业学院 |
| |
| 摘 要： | 此文围绕一个带有四个矩形缺口的圆筒形拉伸件的冲压工艺及模具设计,详尽分析了其变形规律、毛坯形状及尺寸的确定、拉伸模设计时碰到的问题及解决方法等。对类似零件的加工有较大的参考价值
|
| 关 键 词： | 带缺口筒形件 冲压工艺 模具设计 |
Stamping Technology and Die Design for the Tube with Notches |
| |
| Nanchang Institute of Aeronautical Technology Chen Weiguo.Stamping Technology and Die Design for the Tube with Notches[J].Equipment Environmental Engineering,1998(2). |
| |
| Authors: | Nanchang Institute of Aeronautical Technology Chen Weiguo |
| |
| Institution: | Nanchang Institute of Aeronautical Technology Chen Weiguo |
| |
| Abstract: | Based on the stamping technology and die design of tubes with four rectangular notches, this paper has analysed the deformation regularity, determination of the blank shape and size and problem-solving method in drawing dies and others for this part. It is useful to produce the similar parts. |
| |
| Keywords: | Tube with notches Stamping technology Die design |
| 本文献已被 CNKI 等数据库收录！ |
