| Abstract: | Effects of Ni(II) concentration, agitation time, temperature and pH on adsorption of Ni(II) on Fe(III)/Cr(III) hydroxide, a waste by-product from fertilizer industry, have been investigated. The percent adsorption increased from 55 to 69% with increase in temperature from 20 to 40°C and from 32 to 77% with increase in pH from 3.7 to 7.5 and from 38 to 79% with decrease in Ni(II) concentration from 100 to 25 mg/L. The equilibrium data fit well with the Langmuir isotherm and the adsorption capacity was found to be 21.0 mg/g at 30°C. Thermodynamic parameters such as free energy change (ΔG°), enthalpy change (ΔH°) and entropy change (ΔS°) were evaluated. The adsorption rate constant was higher at lower concentration of Ni(II) and at higher temperature. Desorption studies show that 70% of Ni(II) can be desorbed from the adsorbent at pH 4.0. The adsorbent was tested using nickel plating industry wastewater and the maximum percent removal was 97. |
