| 折叠翼机构加载展开试验系统设计和仿真研究 |
| |
| 引用本文： | 郑旸,吴斌,杨森.折叠翼机构加载展开试验系统设计和仿真研究[J].装备环境工程,2013,10(2):38-42,95. |
| |
| 作者姓名： | 郑旸 吴斌 杨森 |
| |
| 作者单位： | 西北工业大学，西安710072;西北工业大学，西安710072;西北工业大学，西安710072 |
| |
| 摘 要： | 设计了一种折叠翼加载展开试验装置，并进行了不同装药量时的加载展开试验，测试了展开时间。建立了折叠翼机构仿真模型，在试验数据的基础上，确定了模型的加力情况。仿真数据表明，加载汽缸引起的附加质量对展开时间影响较小，加载试验方法可行；弹翼加上模拟升力后，展开时间比不加模拟升力长20%左右，对展开时间影响显著。
|
| 关 键 词： | 折叠翼 展开试验 加载装置 |
| 收稿时间： | 2012/10/27 0:00:00 |
| 修稿时间： | 3/1/2013 12:00:00 AM |
Design and Simulation of Folding Wings Loading and Spreading Experimental Device |
| |
| ZHENG Yang,WU Bin and YANG Sen.Design and Simulation of Folding Wings Loading and Spreading Experimental Device[J].Equipment Environmental Engineering,2013,10(2):38-42,95. |
| |
| Authors: | ZHENG Yang WU Bin and YANG Sen |
| |
| Abstract: | A spreading experimental device was designed for folding wings. Loading and spreading experiments were carried out in different amount of powder and spreading time was measured. Simulation model of the folding wings was established and the loading of the model was determined with the experimental data. The simulation results showed that the additional mass caused by the loading cylinder barely impact on the spreading time; the experimental methods is feasible; the influence of simulated lift is significant, as the spreading time with the simulated lift is longer than without it by about20%. |
| |
| Keywords: | |
|
| 点击此处可从《装备环境工程》浏览原始摘要信息 |
| 点击此处可从《装备环境工程》下载免费的PDF全文 |
