Explosive properties of selected aerosols determined in a spherical 5-L test chamber

Combustible liquids in the form of aerosols are important for many industrial processes. Therefore the problem of explosion hazards posed by the aerosols becomes increasingly more prominent. To correctly assess the explosion risk and fulfil the requirements of the ATEX directive, it is necessary to obtain information regarding the flammable and explosive properties of the aerosols. Unlike in the case of gases and dusts, no standard procedures aimed at obtaining quantitative information of this type exist. Factors that influence the explosion dynamics of aerosols include: concentration, droplet size, temperature etc. Some of these factors are strongly dependent on the aerosol generation methods. A prototype apparatus was designed and constructed to address that dependence. The apparatus was used in an attempt to determine the basic explosion parameters of liquid flammable aerosols. The device consisted of a 5-L spherical vessel equipped with a pump-injection system that generated aerosols as well as a spark ignition source. A wide variety of injection settings were tested to select the most suitable conditions over a broad range of concentrations and fluid properties. A measurement procedure was developed for operating the device. Prototype tests were carried out with fluids commonly used in industry: isopropanol and kerosene. The tests demonstrated the significant influence of the vessel wall temperature on the result accuracy. Correct temperature control made it possible to obtain relationships between the aerosol concentration and the following explosion parameters: maximum explosion pressure and maximum rate of pressure rise.