| UASBAF工艺在龙涤集团废水处理中的应用 |
| |
| 引用本文： | 韩洪军.UASBAF工艺在龙涤集团废水处理中的应用[J].环境科学与技术,1999(4):34-36. |
| |
| 作者姓名： | 韩洪军 |
| |
| 作者单位： | 哈尔滨建筑大学!哈尔滨150001 |
| |
| 摘 要： | 采用厌氧污泥床过滤器（ＵＡＳＢＡＦ）处理龙涤集团高浓度涤纶废水，经过设计参数选择，工程设计和运行效果分析。运行结果证明，ＵＡＳＢＡＦ厌氧池的容积负荷为９．２ｋｇＣＯＤ／ｍ ３·ｄ，ＣＯＤ去除率８０％ ，接触氧化池的ＣＯＤ去除率９５％ 左右，处理效果稳定，基本达到设计要求。
|
| 关 键 词： | 涤纶聚脂废水 厌氧污泥床 工程设计 |
Engineering design on treatm entofw astew ater ofLongdibloc to utilize UASBAFreactor |
| |
| HAN Hong-Jun.Engineering design on treatm entofw astew ater ofLongdibloc to utilize UASBAFreactor[J].Environmental Science and Technology,1999(4):34-36. |
| |
| Authors: | HAN Hong-Jun |
| |
| Abstract: | The UASBAFanaerobicreactorw asapplied on treatm entofhigh strength terylene w astew ator ofLongdibloc and w as described engineering design and analysis ofits operation result. The results dem on- strated that UASBAF anaerobic reactor is 9.2kg COD/m 3 ·d of volum e loading, the rem oval of COD is about 80% , and the CODrem ovalofcontactoxidation is about90% . The reactor has som e advantages such as good effect, m eeting desigx goaletc. |
| |
| Keywords: | terylene w astew ater Anaerobic sludge bed Engineering design |
| 本文献已被 CNKI 维普 等数据库收录！ |
