Effects of beach sand properties, temperature and rainfall on the degradation rates of oil in buried oil/beach sand mixtures

Lysimeters located outdoors have been used to evaluate the decomposition of buried oily beach sand waste (OBS) prepared using Forties light crude oil and sand from different locations around the British coast. The OBS (5% oil by weight) was buried as a 12-cm layer over dune pasture sub-sand and overlain by 20 cm of dune pasture topsoil. Decomposition rates of oil residues averaged 2300 kg ha(-1) in the first year and the pattern of oil decomposition may be represented by a power curve. Oil decomposition was strongly related to the temperature in the OBS layer, but was also significantly affected by rainfall in the previous 12 h. The CO(2) flux at the surface of the treatment lysimeters followed the relationship log(10) CO(2) (mg C m(-2) h(-1))=0.93+0.058x OBS temp. (degrees C)-0.042x12 h rain (mm)]. There was considerable variation in the rate of oil decomposition in sands collected from different sites. Sand from Askernish supported most microbial activity whilst sand from Tain was relatively inactive. The decomposition process appeared to cease when the sand became saturated with water, i.e. temporarily anaerobic. However, decomposition recommenced when the soil dried out. The fastest rate of decomposition occurred in sand from one of the two sites predicted to have high populations of hydrocarbon-degrading bacteria. Larger particle size and higher Ca content may also be significant factors governing the rate of decomposition.