Characteristics of PM10, PM2.5, CO2 and CO monitored in interiors and platforms of subway train in Seoul, Korea

This study was performed to investigate the concentration of PM₁₀ and PM_2.5 inside trains and platforms on subway lines 1, 2, 4 and 5 in Seoul, KOREA. PM₁₀, PM_2.5, carbon dioxide (CO₂) and carbon monoxide (CO) were monitored using real-time monitoring instruments in the afternoons (between 13:00 and 16:00). The concentrations of PM₁₀ and PM_2.5 inside trains were significantly higher than those measured on platforms and in ambient air reported by the Korea Ministry of Environment (Korea MOE). This study found that PM₁₀ levels inside subway lines 1, 2 and 4 exceeded the Korea indoor air quality (Korea IAQ) standard of 150 μg/m³. The average percentage that exceeded the PM₁₀ standard was 83.3% on line 1, 37.9% on line 2 and 63.1% on line 4, respectively. PM_2.5 concentration ranged from 77.7 μg/m³ to 158.2 μg/m³, which were found to be much higher than the ambient air PM_2.5 standard promulgated by United States Environmental Protection Agency (US-EPA) (24 h arithmetic mean: 65 μg/m³). The reason for interior PM₁₀ and PM_2.5 being higher than those on platforms is due to subway trains in Korea not having mechanical ventilation systems to supply fresh air inside the train. This assumption was supported by the CO₂ concentration results monitored in tube of subway that ranged from 1153 ppm to 3377 ppm. The percentage of PM_2.5 in PM₁₀ was 86.2% on platforms, 81.7% inside trains, 80.2% underground and 90.2% at ground track. These results indicated that fine particles (PM_2.5) accounted for most of PM₁₀ and polluted subway air. GLM statistical analysis indicated that two factors related to monitoring locations (underground and ground or inside trains and on platforms) significantly influence PM₁₀ (p < 0.001, R² = 0.230) and PM_2.5 concentrations (p < 0.001, R² = 0.172). Correlation analysis indicated that PM₁₀, PM_2.5, CO₂ and CO were significantly correlated at p < 0.01 although correlation coefficients were different. The highest coefficient was 0.884 for the relationship between PM₁₀ and PM_2.5.