首页 | 本学科首页   官方微博 | 高级检索  
     检索      

防腐漆涂装含锌废水中锌粉的回收与利用
引用本文:葛棋,梁亮.防腐漆涂装含锌废水中锌粉的回收与利用[J].化工环保,2018,38(1):106-111.
作者姓名:葛棋  梁亮
作者单位:广东工业大学 轻工化工学院,广东 广州 510006
摘    要:从水性环氧富锌涂料工业涂装废水中回收废锌粉,通过加热二甲基亚砜来溶解包覆于废锌粉表面的环氧树脂漆膜,得到回收锌粉,并将其再利用制防腐漆。在沉降时间12 h、热处理温度110 ℃、热处理时间60 min的条件下,废锌粉表面上的环氧树脂被去除,可直接以金属锌粉的形态加以回收利用,回收锌粉达到GB/T 6890—2012《锌粉》中的二级标准。使用后的溶剂经旋转蒸发后可再次使用,对锌粉的回收效果无影响。回收锌粉制备的防腐漆,其防腐蚀性能良好,可比市售锌粉。

关 键 词:环氧树脂  溶剂  锌粉  回收  
收稿时间:2017-04-28

Recovery and utilization of zinc powder from zinc-containing anticorrosive paint wastewater
Ge Qi,Liang Liang.Recovery and utilization of zinc powder from zinc-containing anticorrosive paint wastewater[J].Environmental Protection of Chemical Industry,2018,38(1):106-111.
Authors:Ge Qi  Liang Liang
Institution:School of Chemical Engineering and Light Industry,Guangdong University of Technology,Guangzhou Guangdong 510006,China
Abstract:The waste zinc powder was recovered from the industrial coating wastewater containing water-based epoxy zinc-rich coating by dissolving the epoxy resin film coated on the surface of the waste zinc powder with heating dimethyl sulfoxide,and was reused to prepare anticorrosive paint. Under the conditions of settling time 12 h,heat treatment temperature 110 ℃ and heat treatment time 60 min,the epoxy resin on the surface of waste zinc powder was removed,and zinc could be recovered directly in the form of metal powder. The quality of the recovered zinc powder reached the second grade of national standards of GB/T 6890-2012. The used solvent could be reused by rotary evaporation,which had no influence to zinc powder recovery. The anticorrosion paint prepared with the recovered zinc powder had good anticorrosion performance,which was comparable to the commercial zinc powder.
Keywords:epoxy resin  solvent  zinc powder  recovery  
本文献已被 CNKI 等数据库收录!
点击此处可从《化工环保》浏览原始摘要信息
点击此处可从《化工环保》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号