首页 | 本学科首页   官方微博 | 高级检索  
     检索      

超滤膜的清洗及污染防控
引用本文:赵鹏.超滤膜的清洗及污染防控[J].化工环保,2018,38(3):333-337.
作者姓名:赵鹏
作者单位:中国石油化工股份有限公司 北京化工研究院,北京 100013
摘    要:针对污水超滤过程中的膜污染问题,比较了不同清洗剂及清洗顺序对污染膜的清洗效果,考察了超滤运行条件对超滤膜污染的影响,为超滤膜污染的防控提供参考。实验结果表明:各种清洗剂对污染超滤膜清洗效果的优劣顺序为盐酸草酸柠檬酸,氢氧化钠次氯酸钠碳酸钠;强酸—强碱的清洗效果好于弱酸—弱碱;强酸—强碱顺序清洗的通量恢复率(91.88%)大于强碱—强酸顺序清洗的通量恢复率(90.05%);最优运行工艺为运行压力0.04 MPa,进水pH 8.0,膜面流速1.947 m/s,运行周期2 h。

关 键 词:超滤  废水处理  膜污染  化学清洗  通量恢复率  
收稿时间:2018-03-14

Cleaning of ultrafiltration membrane and prevention of membrane fouling
ZHAO Peng.Cleaning of ultrafiltration membrane and prevention of membrane fouling[J].Environmental Protection of Chemical Industry,2018,38(3):333-337.
Authors:ZHAO Peng
Institution:Sinopec Beijing Research Institute of Chemical Industry,Beijing 100013,China
Abstract:Aiming at membrane fouling in the process of ultrafiltration,the effects of different cleaning agents and cleaning sequence on the fouling membrane were compared,and the effects of ultrafiltration operation conditions on membrane fouling were investigated,which can provide reference for the prevention and control of ultrafiltration membrane fouling. The experimental results showed that:The order of cleaning effect of various cleaning agents was hydrochloric acid>oxalic acid>citric acid,sodium hydroxide>sodium hypochlorite>sodium carbonate;The cleaning effect of strong acid-strong alkali was better than that of weak acid-weak alkali;The flux recovery rate of sequential cleaning of strong acid-strong alkali was 91.88%,which was larger than that of strong alkali-strong acid cleaning(90.05%). The optimal operation conditions were as follows:operating pressure 0.04 MPa,influent pH 8.0,membrane surface flow rate 1.947 m/s and operation cycle 2 h.
Keywords:ultrafiltration  wastewater treatment  membrane fouling  chemical cleaning  flux recovery rate  
本文献已被 CNKI 等数据库收录!
点击此处可从《化工环保》浏览原始摘要信息
点击此处可从《化工环保》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号