| 聚乙烯/造纸污泥废弃物复合材料 |
| |
| 引用本文： | 柴希娟,孙可伟,王木平.聚乙烯/造纸污泥废弃物复合材料[J].环境工程,2007,25(1):59-60,63. |
| |
| 作者姓名： | 柴希娟 孙可伟 王木平 |
| |
| 作者单位： | 昆明理工大学环境科学与工程学院,云南,650093;废弃物资源化国家工程研究中心,昆明,650093 |
| |
| 摘 要： | 研究填料粒径和用量对聚乙烯/造纸污泥废弃物复合材料力学性能的影响。采用氢氧化钠和KH-550硅烷作为填料的表面处理剂,马来酸酐接枝聚乙烯作为体系的相容剂改善复合材料的综合性能。实验结果表明,这2种方法均可不同程度地提高复合材料的力学性能,马来酸酐接枝聚乙烯的加入可以有效改善基体与填料之间的相互作用。
|
| 关 键 词： | 聚乙烯 造纸污泥 废弃物复合材料 |
| 修稿时间： | 2006-03-24 |
STUDY ON POLYETHYLENE/WASTE SLUDGE OF PAPERMAKING WASTE COMPOSITE |
| |
| Chai Xijuan,Sun Kewei,Wang Muping.STUDY ON POLYETHYLENE/WASTE SLUDGE OF PAPERMAKING WASTE COMPOSITE[J].Environmental Engineering,2007,25(1):59-60,63. |
| |
| Authors: | Chai Xijuan Sun Kewei Wang Muping |
| |
| Institution: | Chai Xijuan Sun Kewei Wang Muping |
| |
| Abstract: | The effect of filler particle size and content on the mechanical behavior of waste sludge of papermaking-reinforced polyethylene waste composite was investigated.In order to improve the general performance of the composite,the sodium hydroxide and KH-550 silane acting as filler modification agents and maleic anhydride modified polyethylene acting as additive of the system were applied.The results show the two kinds of agents can enhance the mechanical performance of the composite.At the same time,the maleic anhydride modified polyethylene can improve the adhesion between the matrix and the filler. |
| |
| Keywords: | polyethylene waste sludge of papermaking and waste composite |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
