DBD技术脱除恶臭气体H2S和CS2的可行性

采用DBD技术脱除工业废气中的H₂S和CS₂.12kV的电压下,分压为4kPa的H₂S,放电5s,去除率接近100%;分压为1.33kPa的CS₂,放电15s,其去除率可达80%.H₂S和CS₂的去除率都随其浓度的增加而下降.在实验室研究的基础上,设计了废气处理量为420m³/h、流速为10m/s的DBD净化装置,进行了实际含H₂S和CS₂的工业废气净化研究,H₂S去除率可达89%,能量消耗为5.2W·h/m³.结果表明DBD技术对于处理含硫恶臭工业废气,具有实际应用价值.

Purification Feasibility of Malodorous Waste Gas Contained H2S and CS2 by DBD Technique

Dielectric barrier discharge(DBD) technique was applied to remove H2S and CS2 in industrial waste gas. In the research of laboratory, when the voltage between two electrodes was 12 kV, 4 x 10(3) Pa H2S was discharged in air for 5 seconds, about 100% of H2S was transformed into H2O and SO2; 1.33 x 10(3) Pa CS2 was discharged in air for 15 seconds, about 80% of CS2 was transformed into CO2, CO and SO2. When the concentration of H2S and CS2 increased, the decomposition of them decreased. Based on the results, a DBD purification apparatus which can dispose 420 m3/h, 10 m/s waste gas was designed and manufactured, the removal rate of H2S can reach 89% and the energy consumption was 5.2 W.h/m3. It was concluded that the DBD technique is worth disposing malodorous industrial waste gases contained H2S and CS2.