首页 | 本学科首页   官方微博 | 高级检索  
     检索      

桉树遗态Fe/C复合材料表面的磷动态解吸过程研究
引用本文:闵彬彬,朱宗强,朱义年,陈海儿,刘阳,李艳红.桉树遗态Fe/C复合材料表面的磷动态解吸过程研究[J].环境污染与防治,2019,41(2):180-184.
作者姓名:闵彬彬  朱宗强  朱义年  陈海儿  刘阳  李艳红
作者单位:桂林理工大学岩溶地区水污染控制与用水安全保障协同创新中心,广西 桂林 541004;广西环境污染控制理论与技术重点实验室,广西 桂林 541004;桂林理工大学岩溶地区水污染控制与用水安全保障协同创新中心,广西 桂林 541004;广西环境污染控制理论与技术重点实验室,广西 桂林 541004;桂林理工大学岩溶地区水污染控制与用水安全保障协同创新中心,广西 桂林 541004;广西环境污染控制理论与技术重点实验室,广西 桂林 541004;桂林理工大学岩溶地区水污染控制与用水安全保障协同创新中心,广西 桂林 541004;广西环境污染控制理论与技术重点实验室,广西 桂林 541004;桂林理工大学岩溶地区水污染控制与用水安全保障协同创新中心,广西 桂林 541004;广西环境污染控制理论与技术重点实验室,广西 桂林 541004;桂林理工大学岩溶地区水污染控制与用水安全保障协同创新中心,广西 桂林 541004;广西环境污染控制理论与技术重点实验室,广西 桂林 541004
基金项目:国家自然科学基金资助项目;广西高校科学技术研究重点项目;广西矿冶与环境科学实验中心项目;广西研究生教育创新计划项目
摘    要:以饱和吸附磷后的桉树遗态Fe/C复合材料(PBGC-Fe/C)为解吸对象,选择解吸液种类、解吸液浓度、流速和温度为影响因素开展动态解吸实验研究。结果表明:NaOH溶液为适宜的解吸液;0.10mol/L NaOH的动态解吸率可达85.39%;增大流速可缩短解吸时间,但过高的流速易导致流出液体积增加而带来二次污染风险;温度对解吸过程有轻微影响。通过傅立叶变换红外光谱(FTIR)和X射线衍射(XRD)表征分析可知,PBGC-Fe/C表面的含氧官能团在解吸过程中至关重要,解吸过程主要由静电斥力作用以及表面配位协同完成。

关 键 词:  复合材料  动态解吸  机制

The dynamic desorption process of phosphorus on the surface porous biomorph-genetic composite of Fe/C with Eucalyptus wood template
MIN Binbin,ZHU Zongqiang,ZHU Yinian,CHEN Haier,LIU Yang,LI Yanhong.The dynamic desorption process of phosphorus on the surface porous biomorph-genetic composite of Fe/C with Eucalyptus wood template[J].Environmental Pollution & Control,2019,41(2):180-184.
Authors:MIN Binbin  ZHU Zongqiang  ZHU Yinian  CHEN Haier  LIU Yang  LI Yanhong
Institution:(Collaborative Innovation Center for Water Pollution Control and Water Safety in Karst Area,Guilin University ofTechnology,Guilin Guangxi 541004;Guangxi Key Laboratory of Environmental Pollution Control Theory and Technology,Guilin Guangxi 541004)
Abstract:A porous biomorph-genetic composite of Fe/C(PBGC-Fe/C)prepared with Eucalyptus wood template after saturated adsorption was employed to study the desorption process.Different types,concentration,flow rate and temperature of desorption solution were chosen as the main factors to investigate the dynamic desorption process and mechanism.The results showed the NaOH solution was the most suitable desorbent.The dynamic desorption ratio reached 85.39%when the concentration of NaOH was 0.10 mol/L,the desorption time could be reduced with the increase of flow rate,but the excessive flow would increase the volume of leach fluid and bring secondary pollution,the temperature had slight effect on the desorption process.Fourier transform infrared spectroscopy(FTIR)and X-ray diffraction(XRD)were used to characterize the PBGC-Fe/C,the results indicated that the oxygen functional groups on the surface of PBGC-Fe/C were vital in the process of desorption.The desorption process was the synergistic effect of electrostatic repulsion and surface coordination reaction.
Keywords:phosphorus  composite  dynamic desorption  mechanism
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号