Adsorption of Cu and Mn on covalently cross-linked alginate gel beads

The covalently cross-linked alginate gel beads were prepared by the reactions of Ca(2+)-doped alginate gel beads, which were formed by spraying a viscous alginate solution into a calcium chloride solution, with cyanogen bromide and following 1,6-diaminohexane. The cross-linking of alginate matrix decreased the mean bead diameter by about 30% and made the beads durable in some extent under alkaline conditions. The adsorption of metal ions on the covalently cross-linked alginate gel beads was rapid and reached at equilibrium within 30 min at 25 degrees C. Adsorption isotherms of Cu(II), Mn(II), and Ca2+ on the beads possessed a stepwise shape, which was firstly determined by Rorrer et al. Ind. Eng. Chem. Res. 32 (1993) 2170] for cross-linked chitosan gel beads and explained by a pore-blockage mechanism. Higher selectivity was determined against Cu(II) over Mn(II) and Ca2+, especially at a low concentration region. These metal adsorption profiles for the covalently cross-linked alginate gel beads was almost the same as those for the un-cross-linked beads, indicating that the cross-linking reactions were performed without interfering the adsorption characteristics of alginate gel beads.