| 环氧树脂生产废水常温常压下催化氧化处理方法研究 |
| |
| 引用本文： | 郑燕,徐江坤,杜祥君.环氧树脂生产废水常温常压下催化氧化处理方法研究[J].环境监控与预警,2011,3(4):51-53. |
| |
| 作者姓名： | 郑燕 徐江坤 杜祥君 |
| |
| 作者单位： | 南京博环环保有限公司,江苏南京,210052 |
| |
| 摘 要： | 采用常温常压催化氧化工艺处理环氧树脂生产废水,通过实验发现,采用南京博环环保有限公司开发的负载型催化剂可以获得较好的效果.在常温常压,进水pH为3.5～5.5,氧化时间为0.5h的条件下,COD的去除率可达到85％.
|
| 关 键 词： | 环氧树脂生产废水 常温常压催化氧化 负载型催化剂 |
| 收稿时间： | 2010/5/17 0:00:00 |
Study on Catalyzing and Oxidizing Wastewater from Production of Epoxy resin under Normal Temperature and Pressure |
| |
| ZHENG Yan,XU Jiang-kun,DU Xiang-jun.Study on Catalyzing and Oxidizing Wastewater from Production of Epoxy resin under Normal Temperature and Pressure[J].Environmental Monitoring and Forewarning,2011,3(4):51-53. |
| |
| Authors: | ZHENG Yan XU Jiang-kun DU Xiang-jun |
| |
| Institution: | ZHENG Yan,XU Jiang-kun,DU Xiang-jun(Bohuan Environment Protection Company of Nanjing,Nanjing,Jiangsu 210052,China) |
| |
| Abstract: | The catalytic oxidation treatment of the wastewater from production of epoxy resin under normal temperature and pressure is studied.Using the carrying-catalyst developed by Nanjing Grand Environment Protection Co.,Ltd and adjusting the pH of wastewater between 3.5～5.5,the removal efficiency of the COD could reach 85% after 0.5 hours＇ reaction under normal temperature and pressure. |
| |
| Keywords: | epoxy resin wastewater normal temperature and pressure catalyzing carrying-catalyst |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《环境监控与预警》浏览原始摘要信息 |
| 点击此处可从《环境监控与预警》下载免费的PDF全文 |
|
