首页 | 本学科首页   官方微博 | 高级检索  
     检索      

水蒸气蒸馏-离子选择电极法测定矿冶废水中氟化物
引用本文:关念云,谢鹏程,黄亮,朱乐杰.水蒸气蒸馏-离子选择电极法测定矿冶废水中氟化物[J].环境监控与预警,2022,14(1):45-48.
作者姓名:关念云  谢鹏程  黄亮  朱乐杰
作者单位:韶关生态环境监测中心站,广东 韶关 512026;韶关学院,化学与土木工程学院,广东 韶关512026
摘    要:建立了采用水蒸气蒸馏进行预处理,用离子选择电极法测定矿冶废水中的氟化物的方法.实验表明,以硫酸为蒸馏试剂,最佳蒸馏条件为,硫酸用量50 mL,蒸馏温度140 ~150℃,蒸馏时间30 min,方法检出限0.05 mg/L.将该方法用于实际样品分析,测定结果的相对标准偏差为2.0%,加标回收率为93.1%.该方法能够有效...

关 键 词:水蒸气蒸馏  离子选择电极法  矿冶废水  氟化物
收稿时间:2021/7/31 0:00:00
修稿时间:2021/9/8 0:00:00

Ion Selective Electrode Method for Determination of Fluoride in Mining and Metallurgy Waste Water with Steam Distillation
GUAN Nian-yun,XIE Peng-cheng,HUANG Liang,ZHU Le-jie.Ion Selective Electrode Method for Determination of Fluoride in Mining and Metallurgy Waste Water with Steam Distillation[J].Environmental Monitoring and Forewarning,2022,14(1):45-48.
Authors:GUAN Nian-yun  XIE Peng-cheng  HUANG Liang  ZHU Le-jie
Institution:(Shaoguan Ecological and Environmental Monitoring Center, Shaoguan, Guangdong 512026, China;School of Chemistry & Civil Engieneering, Shaoguan University, Shaoguan, Guangdong 512026, China)
Abstract:A method for determination of fluoride in mining and metallurgy waste water was established by using ion selective electrode method followed by steam distillation.The experiments indicated that the best distillation temperature were in the range of 140℃to 150℃in 30 minutes when sulfuric acid was used as distillation reagent with a dose of 50ml.The method detection limit was 0.05 mg/L.The results of real sample analysis showed the relative standard deviation was 2.0%,and the recovery was 93.1%.The method could effectively eliminate the interference of heavy metals,and is simple and easy to operate,precision and accuracy are both good as well.
Keywords:Steam distillation  Ion selective electrode method  Mining and metallurgy waste water  Fluoride
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《环境监控与预警》浏览原始摘要信息
点击此处可从《环境监控与预警》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号