Simultaneous extraction of bromide, chloride, fluoride and sulfate from soils, waste- and building materials

The simultaneous extraction of bromide, chloride, fluoride and sulfate was studied in soils, waste- and building materials. Acid, neutral and alkaline extractants were used; 0.01 mol l(-1) H(3)PO(4), milliQ-water and 0.01 mol l(-1) NaOH, respectively. The extracts were analysed by ion chromatography and ion selective electrode. Extracted concentrations were compared with the amount obtained by an alkaline smelt, as an approximation of the total extractable content. The results indicate that there is a significant difference in extraction behaviour between waste- and building materials and soils. Bromide and chloride were in general completely extracted from the former solid materials, but less than 10% and 50%, respectively, from soils. Fluoride is strongly bound in all investigated samples; less than 10% of the total content was extracted with any of the three extractants. The fraction of extracted sulfate varied between 4 and 87% of the total content, and was in general larger in waste- and building materials than in soils. Differences in extracted concentration between the 3 extractants occurred mainly for fluoride and sulfate. Extracted bromide was similar with all three extractants and extracted chloride showed differences for the various soil samples only. Increasing the NaOH concentration up to 1 mol l(-1) resulted mainly in an increase of extracted amount of fluoride and for soils also in extracted amounts of bromide and sulfate. Although, the results show that the composition of the solid material strongly influences the final pH of the extract and the extracted amount of investigated anions, application of Milli-Q water as an extractant might be a very fruitful option within the development of the Dutch Building Materials Decree.