| 烟气CO2捕集纯化装置设计要点分析 |
| |
| 引用本文： | 林名桢,闫广宏,陈宏福,刘坤,李洪言.烟气CO2捕集纯化装置设计要点分析[J].工业安全与环保,2022,48(2):103-106. |
| |
| 作者姓名： | 林名桢 闫广宏 陈宏福 刘坤 李洪言 |
| |
| 作者单位： | 山东石油化工学院油气工程学院 山东东营257061;中石化石油工程设计有限公司 山东东营257026 |
| |
| 摘 要： | 利用CO2驱油不仅可以提高原油采收率和延长油井生产寿命,还可以减少CO2的排放,保护大气环境,而CO2捕集技术是驱油过程中的重要环节之一.对现有的装置设计技术进行了研究分析,同时结合工程经验,分别从装置的组成、预处理系统的设计要点、吸收解析系统中化学吸收剂的选择、引风机的设置、系统水平衡的保持措施、系统能量的回收利用措...
|
| 关 键 词： | 烟气 预处理 捕集纯化 制冷系统 装置设计 |
Analysis on the design key points of carbon dioxide capture and purification plant for flue gas |
| |
| LIN Mingzhen,YAN Guanghong,CHEN Hongfu,LIU Kun,LI Hongyan.Analysis on the design key points of carbon dioxide capture and purification plant for flue gas[J].Industrial Safety and Dust Control,2022,48(2):103-106. |
| |
| Authors: | LIN Mingzhen YAN Guanghong CHEN Hongfu LIU Kun LI Hongyan |
| |
| Institution: | (College of Oil and Gas Engineering,Shandong Institute of Petroleum and Chemical Technology Dongying,Shandong 257061;不详) |
| |
| Abstract: | The use of oil displacement method of CO2 injection can not only improve crude oil recovery rate,extend the production life of oil wells,but also reduce the emission of carbon dioxide and protect the atmospheric environment.CO2 capture technology is one of the important parts for the oil displacement process.The design technology of existing device was studied and analyzed in this paper.Combined with engineering experiences,some reasonable suggestions are put forward in detail for the composition of the device,the design points of the pretreatment system,the selection of chemical absorbent,the setting of induced draft fan,the measures to maintain the water balance of the system,the recovery and utilization of system energy,process selection of the liquefaction system and design point of refrigeration system. |
| |
| Keywords: | flue gas pretreatment capture and purification refrigeration system design of device |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
