| O／W型乳化液的处理 |
| |
| 引用本文： | 张仲燕,卞华松.O／W型乳化液的处理[J].化工环保,1996,16(1):26-30. |
| |
| 作者姓名： | 张仲燕 卞华松 |
| |
| 作者单位： | 上海大学 |
| |
| 摘 要： | 采用药剂破乳－电解破乳工艺处理Ｏ／Ｗ型乳化液，药剂破乳选用聚合硫酸铁为破乳剂，破乳时最佳ＰＨ为８，聚合硫酸铁的最佳投量为１５００ｍｇ／Ｌ，电解破乳选用铁作阳极，铝作阴极，电流密度０．８６Ａ／ｄｍ＾２，极距２５ｍｍ，电解时间３ｈ。在上述条件下，破乳效果良好，出水清澈透明，ＣＯＤ总去除率可达到９６－９７％。
|
| 关 键 词： | 破乳 破乳剂 乳化液处理 废水处理 聚合硫酸铁 |
Treatment of an O/W Emulsion Wastewater |
| |
| Zhang Zhongyan,Bian Huasong,Zhu Ping and Zhao Gengmei.Treatment of an O/W Emulsion Wastewater[J].Environmental Protection of Chemical Industry,1996,16(1):26-30. |
| |
| Authors: | Zhang Zhongyan Bian Huasong Zhu Ping and Zhao Gengmei |
| |
| Abstract: | An O/W emulsion wastewater has been treated by dosing PFS as an emulsion breaker and then by an electrolysis process for emulsion breaking.The conditions of emulsion breaking are as follows: 1500mg/L of PFS dosage under pH7 for the former process;iron anode,0. 86A/dm2 of current density,25mm of distance between electrodes and 3h of electrolysis time for the latter process.Under the above-conditions,the effect of emulsion breaking is good, the effluent is clear and the total COD removal rate can come up to 96% 97%. |
| |
| Keywords: | s:emulsion breaking emulsion breaker emulsion wastewater treatment |
| 本文献已被 CNKI 维普 等数据库收录！ |
