Chemical oxidation of cable insulating oil contaminated soil

Leaking cable insulating oil is a common source of soil contamination of high-voltage underground electricity cables in many European countries. In situ remediation of these contaminations is very difficult, due to the nature of the contamination and the high concentrations present. Chemical oxidation leads to partial removal of highly contaminated soil, therefore chemical oxidation was investigated and optimized aiming at a subsequent bioremediation treatment. Chemical oxidation of cable oil was studied with liquid H₂O₂ and solid CaO₂ as well as permanganate at pH 1.8, 3.0 and 7.5. Liquid H₂O₂ most effectively removed cable oil at pH 7.5 (24%). At pH 7.5 poor oil removal of below 5% was observed with solid CaO₂ and permanganate within 2 d contact time, whereas 18% and 29% was removed at pH 1.8, respectively. A prolonged contact time of 7 d showed an increased oil removal for permanganate to 19%, such improvement was not observed for CaO₂.Liquid H₂O₂ treatment at pH 7.5 was most effective with a low acid use and was best fit to a subsequent bioremediation treatment. To further optimize in situ chemical oxidation with subsequent bioremediation the effect of the addition of the iron catalyst and a stepwise liquid H₂O₂ addition was performed. Optimization led to a maximum of 46% cable oil removal with 1469 mM of H₂O₂, and 6.98 mM Fe(II) chelated with citric acid (H₂O₂:FeSO₄ = 210:1 (mol mol⁻¹). The optimum delivery method was a one step addition of the iron catalyst followed by step wise addition of H₂O₂.