Modeling the partitioning of BTEX in water-reformulated gasoline systems containing ethanol

The objectives of this research were to quantify the extent of cosolvency for water–gasoline mixtures containing ethanol and to identify appropriate modeling tools for predicting the equilibrium partitioning of BTEX compounds and ethanol between an ethanol-bearing gasoline and water. Batch-equilibrium experiments were performed to measure ethanol and BTEX partitioning between a gasoline and aqueous phase. The experiments incorporated simple binary and multicomponent organic mixtures comprised of as many as eight compounds as well as highly complex commercial gasolines where the composition of the organic phase was not completely defined. At high ethanol volume fractions, the measured partition coefficients displayed an approximate linear relationship when plotted on semi-log scale as a function of ethanol volume fraction. At lower concentrations, however, there was a distinctly different trend which is attributed to a change in solubilization mechanisms at these concentrations. Three mathematical models were compared with or fit to the experimental results. Log-linear and UNIFAC-based models were used in a predictive capacity and were capable of representing the overall increase in partition coefficients as a function of increasing ethanol content in the aqueous phase. However, neither of these predicted the observed two-part curve. A piecewise model comprised of a linear relationship for low ethanol volume fractions and a log-linear model for higher concentrations was fit to data for a surrogate gasoline comprised of eight compounds and was then used to predict BTEX concentrations in the aqueous phase equilibrated with three different commercial gasolines. This model was superior to the UNIFAC predictions, especially at the low aqueous ethanol concentrations.