| UASB+SBR处理皮革生产废水 |
| |
| 引用本文： | 吴俊峰,刘海成,王现丽.UASB+SBR处理皮革生产废水[J].环境工程,2009,27(6). |
| |
| 作者姓名： | 吴俊峰 刘海成 王现丽 |
| |
| 作者单位： | 1. 河南城建学院环境与市政工程系,河南平顶山467044;华中科技大学环境科学与工程学院,武汉430074
2. 河南城建学院环境与市政工程系,河南平顶山,467044 |
| |
| 摘 要： | 介绍了采用UASB+SBR工艺处理皮革生产废水的设计实例。运行结果表明:该工艺对COD、BOD5、SS的去处率分别可达到96.1%、94.8%、95.1%,出水浓度分别为126,74,125 mg/L。该工艺出水水质稳定且达到GB8978-1996《污水综合排放标准》皮革类二级标准。
|
| 关 键 词： | 皮革生产废水 处理 工艺设计 |
TREATMENT OF TANNERY EFFLUENT WITH UASB-SBR |
| |
| Wu Junfeng,Liu Haicheng,Wang Xianli.TREATMENT OF TANNERY EFFLUENT WITH UASB-SBR[J].Environmental Engineering,2009,27(6). |
| |
| Authors: | Wu Junfeng Liu Haicheng Wang Xianli |
| |
| Abstract: | The design and performance of tannery effluent treatment with UASB-SBR are expatiated in this paper. The operating result indicates that the removal rates of COD, BOD, and SS can reach 96.1%, 94.8% and 95.1%, respectively. And the effluent concentrations of COD, BOD and SS are 126, 74 and 125 mg/L, respectively. The water quanlity of effluent is stable and the effluent can achieve Ⅱ -class criteria for tannery effluent specified in "Sewage Integrated Discharge Standard"(GB8978-1996). |
| |
| Keywords: | tannery effluent treatment technological design |
| 本文献已被 万方数据 等数据库收录！ |
|
