| 水解-接触氧化-气浮-生物碳工艺处理高浓度印染废水工程实例 |
| |
| 引用本文： | 郑广宏,乔俊莲,顾国维,徐一飞,沈阳.水解-接触氧化-气浮-生物碳工艺处理高浓度印染废水工程实例[J].环境工程,2003,21(5):21-23. |
| |
| 作者姓名： | 郑广宏 乔俊莲 顾国维 徐一飞 沈阳 |
| |
| 作者单位： | 1. 同济大学环境科学与工程学院,上海,200092
2. 常熟市环境科学研究所,江苏,215500 |
| |
| 摘 要： | 采用水解 接触氧化 气浮 生物碳工艺处理印染废水 ,设计规模为 14 4 0m3 d。总排放口水质为 :pH =6 98,CODCr=83mg L ,BOD5=2 3 5mg L ,SS=5 3mg L ,色度 =4 0倍。
|
| 关 键 词： | 印染废水 水解 接触氧化 气浮 生物碳 |
AN ENGINEERING EXAMPLE OF TREATING HIGH-CONCENTRATION PRINTING AND DYEING WASTEWATER WITH PROCESS OF HYDROLYSIS-CONTACT OXIDATION-AIR FLOATATION-BIOCARBON |
| |
| Zheng Guanghong et al.AN ENGINEERING EXAMPLE OF TREATING HIGH-CONCENTRATION PRINTING AND DYEING WASTEWATER WITH PROCESS OF HYDROLYSIS-CONTACT OXIDATION-AIR FLOATATION-BIOCARBON[J].Environmental Engineering,2003,21(5):21-23. |
| |
| Authors: | Zheng Guanghong |
| |
| Institution: | Zheng Guanghong et al |
| |
| Abstract: | A printing and dyeing wacewater was treated with the process of hydrolysis contact oxidation air floatation biocarbon.The design capacity was 1 440 m 3/d .The pH,COD Cr ,BOD 5,SS and colority of the effluent were 6 98,83 mg/L,23 5 mg/L,53 mg/L and 40 times respectively. |
| |
| Keywords: | printing and dyeing wastewater hydrolysis bio contact oxidation air floatation and biocarbon |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
