| 滤筒结构优化试验研究 |
| |
| 引用本文： | 吴利瑞,茅清希,梅红生,戴斌香.滤筒结构优化试验研究[J].环境工程,2003,21(3):39-41. |
| |
| 作者姓名： | 吴利瑞 茅清希 梅红生 戴斌香 |
| |
| 作者单位： | 1. 同济大学,上海,200092
2. 上海凌桥环保设备厂,上海,200137 |
| |
| 摘 要： | 首先分析了滤筒的直径、褶高、褶数和滤筒夹角之间的关系 ,然后通过试验研究 ,对比了同一直径不同褶高不同褶数的 6种滤筒的性能 ,得到了滤筒理想夹角和褶高。在此基础上对其它直径的滤筒进行了优化
|
| 关 键 词： | 滤筒 滤筒结构 优化 |
EXPERIMENTAL RESEARCH ON THE STRUCTURE OPTIMIZING OF FILTER CARTRIDGE |
| |
| Wu Lirui et al.EXPERIMENTAL RESEARCH ON THE STRUCTURE OPTIMIZING OF FILTER CARTRIDGE[J].Environmental Engineering,2003,21(3):39-41. |
| |
| Authors: | Wu Lirui |
| |
| Institution: | Wu Lirui et al |
| |
| Abstract: | Firstly the relations amang the diameter,the depth of pleat,the number of pleat and the included angle of fitter cartridge are analyzed.Secondly by experiment the preformances of six types of filter cartridges,which have the same diameter,different depth of pleat,and different number of pleat are also compared.At last,the ideal included angle and depth of pleat of the filter cartridge are obtained.Based on these the other filter cartridges with different diameters are optimized. |
| |
| Keywords: | filter cartridge cartridge structure and optimize |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
