| 水解-生物接触氧化法处理粘合剂废水 |
| |
| 引用本文： | 马汉泽,温旭志.水解-生物接触氧化法处理粘合剂废水[J].环境工程,1999,17(5):11-13. |
| |
| 作者姓名： | 马汉泽 温旭志 |
| |
| 作者单位： | 汕头市环海工程总公司!广东515041 |
| |
| 摘 要： | 采用水解生物接触氧化法处理粘合剂废水,结果表明:该工艺对废水中CODCr及BOD5的去除有显著效果,当原废水CODCr在1000～2000mg/L之间,BOD5在500～1000mg/L之间时,CODCr去除率大于90%,BOD5去除率大于93%。从而确保了废水后续处理达标排放。
|
| 关 键 词： | 水解 生物接触氧化 粘合剂废水 |
TREATMENT OF ADHESIVE WASTEWATER BY HYDROLYSIS BIOCONTACT OXIDATION PROCESS |
| |
| Ma Hanze et al.TREATMENT OF ADHESIVE WASTEWATER BY HYDROLYSIS BIOCONTACT OXIDATION PROCESS[J].Environmental Engineering,1999,17(5):11-13. |
| |
| Authors: | Ma Hanze |
| |
| Abstract: | The hydrolysis biocontact oxidation process can be utilized in treatment of adhesive wastewater.The result shows that this process has an obvious effect on removal of COD Cr and BOD 5 in the wastewater. When COD Cr and BOD 5 in the raw wastewater are 1000～2000mg/L and 500～1000mg/L respectively,after treating it by this process,COD Cr and BOD 5 can be removed over 90% and 93% respectively,which makes sure the wastewater after the subsequent treatment meet the emission standards. |
| |
| Keywords: | hydrolysis biocontact oxidation and adhesive wastewater |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
