| 典型电容近炸引信存储性能退化分析 |
| |
| 引用本文： | 吴英伟,齐杏林,王洪岩,余春华.典型电容近炸引信存储性能退化分析[J].装备环境工程,2018,15(2):63-67. |
| |
| 作者姓名： | 吴英伟 齐杏林 王洪岩 余春华 |
| |
| 作者单位： | 1.陆军工程大学 石家庄校区，河北 石家庄 050003； 2.中国白城兵器试验中心，吉林 白城 137001,陆军工程大学 石家庄校区，河北 石家庄 050003,陆军工程大学 石家庄校区，河北 石家庄 050003,陆军北京军代局驻长治地区军代室，山西 长治 046012 |
| |
| 摘 要： | 目的分析退化或失效的原因及机理。方法提出电容近炸引信储存性能试验,结合引信组成结构特点和出厂性能要求,对实际储存2~8年的引信开展储存性能检测试验,并对试验结果进行分析,进而确定性能退化敏感参数。结果性能退化原因和机理分析表明,三极管、电阻、电路中导电胶粘结力、电感线圈等长储后性能退化影响引信性能。结论确定了引信长储后检测时应重点关注定时器接电前输入电流、炸高和检波电压三项参数,并着重分析三极管、电阻、电路中导电胶和电感线圈等部位。
|
| 关 键 词： | 电容近炸引信 储存性能 退化分析 |
| 收稿时间： | 2017/10/2 0:00:00 |
| 修稿时间： | 2018/2/15 0:00:00 |
Storage Performance Degradation of Typical Capacitance Proximity Fuse |
| |
| WU Ying-wei,QI Xing-lin,WANG Hong-yan and YU Chun-hua.Storage Performance Degradation of Typical Capacitance Proximity Fuse[J].Equipment Environmental Engineering,2018,15(2):63-67. |
| |
| Authors: | WU Ying-wei QI Xing-lin WANG Hong-yan and YU Chun-hua |
| |
| Institution: | 1.Shijiazhuang Campus, Army Engineering University, Shijiazhuang 050003, China; 2.Baicheng Ordnance Test Center of China, Baicheng 137001, China,Shijiazhuang Campus, Army Engineering University, Shijiazhuang 050003, China,Shijiazhuang Campus, Army Engineering University, Shijiazhuang 050003, China and Military Delegate Office of Beijing Military Delegate Bureau to Changzhi, PLA Army, Changzhi 046012, China |
| |
| Abstract: | Objective To analyze causes and mechanisms of degradation or failure. Methods The storage performance test method of capacitance proximity fuse was put forward. In combination with the requirements of the composition, structure and performance of fuse, storage performance of fuse stored for 2~8 years was tested. And the test results were analyzed to determine the sensitive parameters of the performance degradation. Results Performance degradation of the causes and mechanism analysis shown that the transistor, the resistance, the conductive adhesive force in the circuit, the inductance coil and other long storage performance degradation influenced the fuse performance. Conclusion After determination of test after long storage of fuse, it is important to pay attention to the three parameters of input current, explosion height and detection voltage, and focus on the analysis of the transistor, the resistance, the conductive glue and the inductance coil in the circuit. |
| |
| Keywords: | capacitance proximity fuse storage performance degradation analysis |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《装备环境工程》浏览原始摘要信息 |
| 点击此处可从《装备环境工程》下载免费的PDF全文 |
|
