| 不锈钢卡压式管件的成形工艺 |
| |
| 引用本文： | 周遐余,赵立军.不锈钢卡压式管件的成形工艺[J].装备环境工程,2003,21(6):93-94. |
| |
| 作者姓名： | 周遐余 赵立军 |
| |
| 作者单位： | 哈尔滨工业大学(威海)，哈尔滨工业大学(威海) 山东威海 264209，山东威海 264209 |
| |
| 摘 要： | 基于建设部2001年颁布的《不锈钢卡压式管件》标准,介绍了三通、弯头、直通等型式管件的塑性成形模具、关键工艺流程及工艺参数。文中所介绍的模具及工艺均适用于大批量生产,且管件成形精度好,模具成本低,综合效率高。
|
| 关 键 词： | 薄壁不锈钢管 卡压式管件 成形工艺 |
| 文章编号： | 1000-8446(2003)06-0093-02 |
| 修稿时间： | 2003年9月16日 |
The Forming Process of Stainless Steel Press-fitting Joints |
| |
| ZHOU Xia-yu,ZHAO Li-jun.The Forming Process of Stainless Steel Press-fitting Joints[J].Equipment Environmental Engineering,2003,21(6):93-94. |
| |
| Authors: | ZHOU Xia-yu ZHAO Li-jun |
| |
| Abstract: | This paper brings forward the forming process for those kinds of joints ,such as straight ,bend, and tee ,based on the "The Standard of Stainless Steel Press-fitting Joints" by the Construction Department. The forming process and moulds in the paper can be used in mass production of joints efficiently with low cost, and the joints are of exact formability . |
| |
| Keywords: | thin-wall stainless steel tube press-fitting joint forming process |
| 本文献已被 CNKI 等数据库收录！ |
|
