| 厚板双曲率模冲压过程的数值模拟与分析 |
| |
| 引用本文： | 职玉山,王仲仁.厚板双曲率模冲压过程的数值模拟与分析[J].装备环境工程,1998(3). |
| |
| 作者姓名： | 职玉山 王仲仁 |
| |
| 摘 要： | 使用有限元方法研究了在制造某特大型真空容器时厚板料的双曲率模冲压过程.对双曲率模冲压后板料的回弹规律进行了模拟,得出了不同的板宽和板厚对板料冲压后回弹量的影响规律,从而为确定冲模修正量的大小提供了依据.同时,也得出了厚板料双曲率模冲压的变形的发生和发展过程,从而为采取措施,避免方板冲压时的屈曲和起皱,使变形过程按照合理的路线进行提供了理论根据.所得结果具有普遍的规律.
|
| 关 键 词： | 有限元方法 厚板料 双曲率模 冲压 回弹 |
FEM Simulation and Analysis of Thick -plate Deformation Process in Twin -curvature Mould |
| |
| Harbin Institute of Technology,Zhi Yushan,Wang Zhongren.FEM Simulation and Analysis of Thick -plate Deformation Process in Twin -curvature Mould[J].Equipment Environmental Engineering,1998(3). |
| |
| Authors: | Harbin Institute of Technology Zhi Yushan Wang Zhongren |
| |
| Abstract: | The deformation process of the thick -plate in twin-curvature mould is simulated in building a certain large-type vacuum vessel. The spring-back law of the thick - plate in twin-curvature mould press is studied. The spring-back pattern of the thick - plate with different width and different thickness is also obtained. This result gives the theoretical foundation in the mould modulation. |
| |
| Keywords: | FEM method Thick -plate Twin-curvature mould Press Spring -back |
|
