基于POF的温度应力加速试验失效机理一致性研究 |
| |
引用本文: | 郑志腾,董澍,徐丹君,蔡健平,伍招冲.基于POF的温度应力加速试验失效机理一致性研究[J].装备环境工程,2016,13(6):104-109. |
| |
作者姓名: | 郑志腾 董澍 徐丹君 蔡健平 伍招冲 |
| |
作者单位: | 中国航天标准化与产品保证研究院,北京,100071 |
| |
基金项目: | “十二五”科工局技术基础科研项目(Z032014B001) |
| |
摘 要: | 目的通过失效物理手段得到温度加速寿命试验的失效机理突变点,节省试验样本,并为加速寿命试验的有效性提供保障。方法利用电子产品典型失效物理模型,在求解MOSFET器件激活能的基础上确定失效机理突变点,并开展失效物理分析,从微观分析的角度验证失效机理一致性判定方法的理论正确性和工程适用性。结果 MOSFET器件在温度低于240℃时,失效机理没有发生改变;温度高于240℃时,失效机理发生了改变,与前述失效机理不一致。结论基于失效物理的方法可以确定器件机理发生变化的温度应力点,所需样本量小。
|
关 键 词: | 加速试验 失效物理 失效机理一致性 |
收稿时间: | 3/9/2016 12:00:00 AM |
修稿时间: | 2016/11/22 0:00:00 |
Research On Failure Mechanism Consistency of Accelerated Testfor Temperature Stress Based on POF |
| |
Abstract: | Objective To save test sample and provide guarantee for efficiency of accelerated test by obtaining change point of failure mechanism in the POF-based accelerated life test.Methods Typical physical model of failure was applied to deter-mine the change point of failure mechanism based on calculating the activation energy of MOSFET. And failure physical analy-sis was implemented to verify the theoretical correctness and engineering applicability of judgment method on consistency of failure mechanism from the micro perspective.Results When temperature was below 240℃ , the failure mechanism did not change. And when the temperature was higher than 240℃ , the failure mechanism changed. It was inconsistent with the above mentioned failure mechanism.Conclusion The POF method can confirm the temperature stress point of changed device me-chanism and the required sample size is small. |
| |
Keywords: | accellerated life test temperatue POF failure mechanism consistency |
本文献已被 CNKI 维普 万方数据 等数据库收录! |
| 点击此处可从《装备环境工程》浏览原始摘要信息 |
| 点击此处可从《装备环境工程》下载免费的PDF全文 |
|