| 电动软轴式玻璃升降器导轨的设计及成形工艺研究 |
| |
| 引用本文： | 李辉平,赵国群,栾贻国.电动软轴式玻璃升降器导轨的设计及成形工艺研究[J].装备环境工程,2002,20(6):46-48. |
| |
| 作者姓名： | 李辉平 赵国群 栾贻国 |
| |
| 作者单位： | 山东大学模具工程技术研究中心 山东济南250061
(李辉平，赵国群)，山东大学模具工程技术研究中心 山东济南250061(栾贻国) |
| |
| 摘 要： | 介绍了电动软轴式玻璃升降器的工作原理。针对某种轿车的玻璃升降器 ,介绍了升降器的机构约束方法 ,并用UGII软件对其运动过程进行了仿真 ,确定了玻璃升降器螺旋导轨的曲率及螺旋导程。由于螺旋导轨成形极其困难 ,对导轨的形状进行修改 ,将螺旋形导轨改为扭转的圆弧导轨。介绍了扭转圆弧导轨的几种成形方法
|
| 关 键 词： | 升降器导轨 结构设计 分析仿真 |
| 文章编号： | 1000-8446(2002)06-0046-03 |
| 修稿时间： | 2002年5月27日 |
Forming Technology Design and Study of the Motor-driven Flexible Glass Lifter System |
| |
| LI Hui ping, ZHAO Guo qun, LUAN Yi guo.Forming Technology Design and Study of the Motor-driven Flexible Glass Lifter System[J].Equipment Environmental Engineering,2002,20(6):46-48. |
| |
| Authors: | LI Hui ping ZHAO Guo qun LUAN Yi guo |
| |
| Abstract: | The fundamental working principle of motor driven flexible glass lifter is introduced. Aiming at glass lifter of certain car, the mechanism bind method of glass lifter is presented, and the movement process of glass lifter is simulated using the software of UGII. According to the simulating result, the ratio and curvature of spiral track is funded. Because it is very difficult to forming the spiral track, the shape of the track are modified, and the spiral track are transformed to. Some technologies of forming the twisting arc track are introduced. |
| |
| Keywords: | track of lifter construction design analysis and simulation |
| 本文献已被 CNKI 等数据库收录！ |
|
