首页 | 本学科首页   官方微博 | 高级检索  
     检索      

响应面法分析Ti/TiO2电极光电催化富里酸的过程
引用本文:傅剑锋,李湘中,季民.响应面法分析Ti/TiO2电极光电催化富里酸的过程[J].中国环境科学,2006,26(6):718-722.
作者姓名:傅剑锋  李湘中  季民
作者单位:1. 东南大学能源与环境学院,江苏,南京,210096
2. 香港理工大学土木与结构系,香港
3. 天津大学环境科学与工程学院,天津,300072
摘    要:利用响应面分析法对影响Ti/TiO2电极光电催化降解富里酸的主要因素进行了探讨.通过Design-Expert 5软件可得到1个二次响应曲面模型.结果表明,最佳的pH值、K2S2O8投加量和偏电压分别为3.8、88.40mg/L、0.88V,此时富里酸的去除率达到最大(57.06%).方差分析表明,模型具有较高的回归率(R2=97.54%),与实验结果吻合程度较高.

关 键 词:光电催化氧化  Ti/TiO2电极  富里酸  响应面法
文章编号:1000-6923(2006)06-0718-05
修稿时间:2006年4月6日

Response surface methodology analyzing fulvic acid degradation process by Ti/TiO2 photoelectrocatalytic oxidation
FU Jian-feng,LI Xiang-zhong,JI Min.Response surface methodology analyzing fulvic acid degradation process by Ti/TiO2 photoelectrocatalytic oxidation[J].China Environmental Science,2006,26(6):718-722.
Authors:FU Jian-feng  LI Xiang-zhong  JI Min
Abstract:Response surface methodology(RSM)was utilized to explore the main factors influencing Ti/TiO2 photoelectrocatalytic degradation of fulvic acid.Through Design-Expert 5 software,a quadratic curved surface model was obtained.The best pH value,K2S2O8 input amount and bias potential were 3.8,88.40mg/L,0.88V respectively;at this time,the removal rate of fulvic acid reached the greatest(57.06%).The regression analysis showed that the model possessed higher regression rate(R2=97.54%),having higher coincide degree with the experimental results.
Keywords:photoelectrocatalytic oxidation  Ti/TiO2 electrode  fulvic acid  response surface methodology
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号