首页 | 本学科首页   官方微博 | 高级检索  
     检索      

页岩气开采钻井固体废物的污染特性
引用本文:吴娜,聂志强,李开环,孙英杰,蔡洪英,张曼丽,周琼,黄启飞.页岩气开采钻井固体废物的污染特性[J].中国环境科学,2019,39(3):1094-1100.
作者姓名:吴娜  聂志强  李开环  孙英杰  蔡洪英  张曼丽  周琼  黄启飞
作者单位:1. 青岛理工大学环境与市政工程学院, 山东 青岛 266033;2. 中国环境科学研究院环境基准与风险评估国家重点实验室/土壤与固体废物环境研究所, 北京 100012;3. 重庆市固体废物管理中心, 重庆 401147
基金项目:中央级公益性科研院所基本科研业务专项(2018YSKY-009);北京市自然科学基金资助项目(8172048)
摘    要:选取重庆某地区3个页岩气田作为研究对象,研究了5个钻井平台页岩气开采过程中废水基和油基钻井岩屑中重金属、多环芳烃(PAHs)和石油烃的污染特性.结果表明,两类钻井岩屑中Ba元素平均含量明显高于其他重金属,废水基钻井岩屑的重金属以Zn、Ba、Cr、Ni、Cu、Pb为主,废油基钻井岩屑中的重金属以Ni、Cu、Zn、Pb、Ba、As、Cr为主且Ni、Cu、Zn、Pb平均含量超过《危险废物鉴别标准毒性物质含量鉴别》(GB5085.6-2007)标准限值.废水基和油基钻井岩屑中PAHs的范围分别为1.74~14.8mg/kg和302~595mg/kg,均未超过GB5085.6-2007标准限值.废油基钻井岩屑石油烃含量为112~213g/kg,远超GB5085.6-2007标准限值.同时,废水基和油基钻井岩屑中BaP超过《土壤环境质量农用地土壤污染风险管控标准(试行)》(GB15618-2018)标准限值;废油基钻井岩屑中部分PAHs(BaP、BbF、BkF、DahA)浓度超过《土壤环境质量建设用地土壤污染风险管控标准(试行)》(GB36600-2018)中筛选值,岩屑中石油烃含量远超管制值.

关 键 词:页岩气  固体废物  重金属  PAHs  石油烃  污染特性  
收稿时间:2018-08-22

Pollution characteristics of solid waste in shale gas mining drilling
WU Na,NIE Zhi-qiang,LI Kai-huan,SUN Ying-jie,CAI Hong-ying,ZHANG Man-li,ZHOU Qiong,HUANG Qi-fei.Pollution characteristics of solid waste in shale gas mining drilling[J].China Environmental Science,2019,39(3):1094-1100.
Authors:WU Na  NIE Zhi-qiang  LI Kai-huan  SUN Ying-jie  CAI Hong-ying  ZHANG Man-li  ZHOU Qiong  HUANG Qi-fei
Institution:1. School of Environmental and Municipal Engineer, Qingdao University of Technology, Qingdao 266033, China;2. State Key Laboratory of Environmental Criteria and Risk Assessment, Soil and Solid Waste Environmental Research Institute, Chinese Research Academy of Environmental Sciences, Beijing 100012, China;3. Chongqing Solid Waste Management Center, Chongqing 401147, China
Abstract:Three shale gas fields in Chongqing were selected. The pollution characteristics of heavy metals, polycyclic aromatic hydrocarbons (PAHs) and petroleum hydrocarbons in wastewater-based and waste oil-based drilling cuttings from the shale gas mining of five drilling platforms were studied. The concentration of Ba in wastewater-based and waste oil-based drilling cuttings was significantly higher than that of other heavy metals. Zn, Ba, Cr, Ni, Cu and Pb were the main heavy metals in the wastewater-based drilling cuttings. While Ni, Cu, Zn, Pb, Ba, As, Cr were the main heavy metals in the waste oil-based drilling cuttings and among which the concentration of Ni, Cu, Zn and Pb exceeded the corresponding limit. The concentration of PAHs in wastewater-based and waste oil-based drilling cuttings were 1.74~14.8mg/kg and 302~595mg/kg, respectively, which did not exceed the limit of the identification standards for hazardous wastes-identification for toxic substance content. The concentration of the petroleum hydrocarbon in waste oil-based drilling cuttings was 112~213g/kg, which was much higher than the limit of the identification standards for hazardous wastes-identification for toxic substance content. At the same time, the concentration of BaP in the wastewater-based and waste oil-based drilling cuttings was higher than the limit of the soil environmental quality-risk control standard for soil contamination of agricultural land; the concentration of BaP, BbF, BkF and DahA in the waste oil-based drilling cuttings were higher than the screening values of the soil environmental quality-risk control standard for soil contamination of development land and the concentration of the petroleum hydrocarbons in the drilling cuttings were much higher than the intervention values.
Keywords:shale gas  solid waste  heavy metals  PAHs  petroleum hydrocarbons  pollution characteristics  
本文献已被 CNKI 等数据库收录!
点击此处可从《中国环境科学》浏览原始摘要信息
点击此处可从《中国环境科学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号