首页 | 本学科首页   官方微博 | 高级检索  
     检索      

壳聚糖分子量与絮凝剂投加量的关系模型
引用本文:林志艳,陈 亮,陈东辉.壳聚糖分子量与絮凝剂投加量的关系模型[J].环境科学研究,2003,16(5):45-47.
作者姓名:林志艳  陈 亮  陈东辉
作者单位:东华大学,环境学院,上海,200051
摘    要:以不同分子量的壳聚糖为絮凝剂,絮凝3种不同初始浊度的皂土溶液,得到了壳聚糖分子量与絮凝剂最佳投加量的关系曲线,拟合得壳聚糖分子量和最佳投加量之间的关系模型,模型计算结果与实验数据点之间的相关系数分别为0.990 2,0.986 4,0.985 2.将此模型应用于实际自来水厂原水的壳聚糖絮凝处理过程,实验数据点与模型计算结果的相关系数达到了0.981 8,说明模型能够较好地应用于实际絮凝情况. 

关 键 词:壳聚糖    分子量    投加量    模型
文章编号:1001-6929(2003)05-0045-03
收稿时间:2002/11/25 0:00:00

Model of Relationship between Molecular Weight and Flocculant Concentration of Chitosan
Institution:School of Environmental Science and Engineering,Donghua University,Shanghai 200051,China
Abstract:The bentonite solution of three initial turbidities was flocculated by chitosan of different molecular weight.A relationship curve between molecular weight and optimal concentration of chitosan was obtained and a relationship model between molecular weight and optimal concentration of chitosan developed by the fitting method.The coefficient between model simulation results and experimental data is respectively 0.990 2,0.986 4 and 0.985 2 under the three initial turbidities.The model was tested by chitosan flocculation experiments for raw water in actual water works,and the coefficient between experimental data and model simulation results was 0.981 8. 
Keywords:chitosan  molecular weight  concentration  model  
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《环境科学研究》浏览原始摘要信息
点击此处可从《环境科学研究》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号