首页 | 本学科首页   官方微博 | 高级检索  
     检索      

兼氧接触工艺处理纺织印染废水的生产性试验
引用本文:郭茂新,余淦申,张砺彦,陈杭飞.兼氧接触工艺处理纺织印染废水的生产性试验[J].环境科学,1997,18(4):56-58.
作者姓名:郭茂新  余淦申  张砺彦  陈杭飞
作者单位:浙江省工业环保设计研究所
摘    要:采用兼氧接触工艺处理纺织印染废水,该工艺具有电耗低,耐受高pH值冲击,降低pH值,降解部分有限物,提高废水可生化性的作用,生产装置进水pH8.8-12.5,COD1266.9mg/L,兼氧接触处理出水pH7.6-10.1COD894.0mg/L,COD去除率29.4%,出水经后续好氧处理,达到GB8978-88二级新扩改排放标准。

关 键 词:兼氧接触  纺织  印染废水  废水处理
收稿时间:3/7/1997 12:00:00 AM

Study on Treatment of Textile Printing and Dying Wastewater with Facultative Aerobic Process
Guo Maoxin,Yu Ganshen.Study on Treatment of Textile Printing and Dying Wastewater with Facultative Aerobic Process[J].Chinese Journal of Environmental Science,1997,18(4):56-58.
Authors:Guo Maoxin  Yu Ganshen
Institution:Zhejiang Industrial Environmental Protection Design Institute, Hangzhou 310005;Zhejiang Industrial Environmental Protection Design Institute, Hangzhou 310005;Zhejiang Industrial Environmental Protection Design Institute, Hangzhou 310005;Zhejiang Industrial Environmental Protection Design Institute, Hangzhou 310005
Abstract:The trial's conclusion showed that the process has the advantage oflower electricity consumption, bearinghigh pH value, degrading some part of organic material and increasing the ability of biochemistry treatment. The result of pilot project showed that the pH value achieved 7.6-10.1 and COD concentration reached 894.0mg/L in the effluent when the pH value was 8.8-12.5 and COD concentration was 1266.9mg/L in influent. The removel rate of COD was 29.4%. The effluent quality was up to the GB8978-88 National Two-Grade Effluent Standard after the continued aerobic treatment.
Keywords:facultativeaerobic  textile printing and dying wastewater  treatment
本文献已被 CNKI 维普 等数据库收录!
点击此处可从《环境科学》浏览原始摘要信息
点击此处可从《环境科学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号