首页 | 本学科首页   官方微博 | 高级检索  
     检索      

醋糟高效厌氧消化体系构建
引用本文:周云龙,许之扬,赵明星,施万胜,黄振兴,何迪,阮文权.醋糟高效厌氧消化体系构建[J].环境科学,2017,38(10):4340-4347.
作者姓名:周云龙  许之扬  赵明星  施万胜  黄振兴  何迪  阮文权
作者单位:江南大学环境与土木工程学院, 无锡 214122;江苏省环境厌氧生物技术重点实验室, 无锡 214122,江南大学环境与土木工程学院, 无锡 214122;江苏省环境厌氧生物技术重点实验室, 无锡 214122,江南大学环境与土木工程学院, 无锡 214122;江苏省环境厌氧生物技术重点实验室, 无锡 214122,江南大学环境与土木工程学院, 无锡 214122;江苏省环境厌氧生物技术重点实验室, 无锡 214122,江南大学环境与土木工程学院, 无锡 214122;江苏省环境厌氧生物技术重点实验室, 无锡 214122,江南大学环境与土木工程学院, 无锡 214122;江苏省环境厌氧生物技术重点实验室, 无锡 214122,江南大学环境与土木工程学院, 无锡 214122;江苏省环境厌氧生物技术重点实验室, 无锡 214122
基金项目:国家自然科学基金项目(51678279);江苏省厌氧生物技术重点实验室开放课题项目(JKLAB201606)
摘    要:运用高固态厌氧消化模式,通过提高反应体系均质程度和沼液回流等手段,逐步提升物料负荷,对未经预处理的醋糟进行厌氧消化处理,成功构建了醋糟高效厌氧消化体系.结果表明,在反应体系物料负荷达到6.15 g·(L·d)~(-1)时表现出最佳的厌氧消化性能,单位干物料产沼气量为396 m L·g~(-1),单位干物料产甲烷量为211 m L·g~(-1).该物料负荷下半纤维素降解率达到63.66%,是醋糟厌氧消化性能提高的主要原因.纤维素、木质素的降解率分别为21.46%、24.43%,较低的降解效率主要是由于木质素中的苯环结构难以降解,并阻碍纤维素酶的水解作用,对纤维素降解产生屏蔽效应.

关 键 词:醋糟  厌氧消化  物料负荷  木质纤维素  纤维素酶
收稿时间:2017/3/13 0:00:00
修稿时间:2017/4/24 0:00:00

Construction of a High Efficiency Anaerobic Digestion System for Vinegar Residue
ZHOU Yun-long,XU Zhi-yang,ZHAO Ming-xing,SHI Wan-sheng,HUANG Zhen-xing,HE Di and RUAN Wen-quan.Construction of a High Efficiency Anaerobic Digestion System for Vinegar Residue[J].Chinese Journal of Environmental Science,2017,38(10):4340-4347.
Authors:ZHOU Yun-long  XU Zhi-yang  ZHAO Ming-xing  SHI Wan-sheng  HUANG Zhen-xing  HE Di and RUAN Wen-quan
Institution:School of Environment and Civil Engineering, Jiangnan University, Wuxi 214122, China;Jiangsu Key Laboratory of Anaerobic Biotechnology, Wuxi 214122, China,School of Environment and Civil Engineering, Jiangnan University, Wuxi 214122, China;Jiangsu Key Laboratory of Anaerobic Biotechnology, Wuxi 214122, China,School of Environment and Civil Engineering, Jiangnan University, Wuxi 214122, China;Jiangsu Key Laboratory of Anaerobic Biotechnology, Wuxi 214122, China,School of Environment and Civil Engineering, Jiangnan University, Wuxi 214122, China;Jiangsu Key Laboratory of Anaerobic Biotechnology, Wuxi 214122, China,School of Environment and Civil Engineering, Jiangnan University, Wuxi 214122, China;Jiangsu Key Laboratory of Anaerobic Biotechnology, Wuxi 214122, China,School of Environment and Civil Engineering, Jiangnan University, Wuxi 214122, China;Jiangsu Key Laboratory of Anaerobic Biotechnology, Wuxi 214122, China and School of Environment and Civil Engineering, Jiangnan University, Wuxi 214122, China;Jiangsu Key Laboratory of Anaerobic Biotechnology, Wuxi 214122, China
Abstract:The model of high solid anaerobic digestion was used by improving the degree of homogeneity of the reaction system and biogas slurry reflux to gradually increase the material load. The vinegar residue-efficient anaerobic digestion system was successfully constructed without pretreatment.The optimum anaerobic digestibility was observed when the material loading of the reaction system reached 6.15 g·(L·d)-1, when the amount of biogas produced per unit of dry material was 396 mL·g-1, and the amount of methane produced per unit of dry material was 211 mL·g-1. The degradation rate of hemicellulose reached 63.66%, which was the main reason for the improvement of anaerobic digestion performance. The degradation rates of cellulose and lignin were 21.46% and 24.43%, respectively. The lower degradation efficiency was mainly due to the complicated degradation of the benzene ring structure in lignin and hindered hydrolysis of cellulose, which had a shielding effect on cellulose degradation.
Keywords:vinegar residue  anaerobic digestion  material loading  lignocellulose  cellulase
本文献已被 CNKI 等数据库收录!
点击此处可从《环境科学》浏览原始摘要信息
点击此处可从《环境科学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号