首页 | 本学科首页   官方微博 | 高级检索  
     检索      

原子荧光光谱法测定环境水样中的锡
引用本文:林芳,丁长春,陆梅.原子荧光光谱法测定环境水样中的锡[J].环境科学与管理,2011,36(11):137-139.
作者姓名:林芳  丁长春  陆梅
作者单位:淮安市环境监测中心站,江苏淮安,223001
摘    要:AFS-9700双道原子荧光光度计测定环境水样中的锡,选择最佳的仪器条件:负高压300V,原子化器高度8mm,灯电流80mA,载气流量400ml/min,屏蔽气流量900ml/min。在最佳酸碱比例-体积分数为4.0%的硝酸介质与20g/L硼氢化钾中,锡荧光强度与其质量浓度在1.00~10.0ug/L成线性关系,方法检出限为0.010ug/L,加标回收率为94.4%~105%,RSD(n=7)<2.3%。此方法更为简便,快速,灵敏度高,适用于环境水样中锡的测定。

关 键 词:原子荧光光谱法  环境水样  

Determination of Tin in Water Samples by Atomic Fluorescence Spectrometry Method
Lin Fang,Ding Changchun,Lu Mei.Determination of Tin in Water Samples by Atomic Fluorescence Spectrometry Method[J].Environmental Science and Management,2011,36(11):137-139.
Authors:Lin Fang  Ding Changchun  Lu Mei
Institution:(Huai'an Environmental Monitoring Center, Huai'an 223001, China)
Abstract:AFS-9700 dual channel atomic fluorescence spectrometry was adopted to determine the tin in water samples. The optimum instrument conditions were: negative high voltage 300V, atomizer height 8mm, lamp current of 80 mA, carrier gas flow rate 400ml/min and shielding gas flow of 900ml/min. The optimum pH proportion-volume fraction ratio is 4.0% of nitric acid medium and 20g/L potassium borohydride. The fluorescence intensity and concentration of tin in 1.00 - 10.0ug/L is linear, detection limit 0.010 ug/L, recovery rate 94.4% - 105% and RSD (n=7) 〈2.3%. This method is simple, rapid, sensitive and suitable for determine tin in environmental water samples.
Keywords:atomic fluorescence spectrometry  environmental water samples  tin
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号