首页 | 本学科首页   官方微博 | 高级检索  
     检索      

深水型表面曝气机的模拟计算与构型比较
引用本文:施慧明,刘艳臣,施汉昌,王颖哲,王淦.深水型表面曝气机的模拟计算与构型比较[J].环境科学进展,2008,2(2):154-159.
作者姓名:施慧明  刘艳臣  施汉昌  王颖哲  王淦
作者单位:[1]清华大学环境科学与工程系,环境模拟与污染控制国家重点联合实验室,北京100084 [2]安徽国祯环保节能科技股份有限公司,合肥230088
基金项目:国家高技术研究发展计划(863)项目(2004AA601060)
摘    要:为了加深氧化沟深度、减少其占地面积、节省污水厂建设投资,研究开发深水型表面曝气机成为氧化沟工艺的一个重要课题。由于上述原因,应用流体力学计算软件Fluent对3种深水型曝气机叶轮的构型进行了模拟计算,并从搅拌深度、推流效果和所需功率等方面对3种叶轮构型进行了比较。又以小试实验进行了初步的验证,证明模拟计算的结果是可靠的。流体力学数值模拟由于其简单易行、成本低、周期短等特点,作为曝气机设计研究的辅助工具可以发挥作用。

关 键 词:深水型表曝机  氧化沟  流体力学模拟计算
文章编号:1673-9108(2008)02-0154-06
收稿时间:2006-12-16
修稿时间:2007-09-06

CFD simulation and performance comparison of surface aerator for deep aeration
Authors:Shi Huiming  Liu Yanchen  Shi Hanchang  Wang Yingzhe  Wang Gan
Abstract:The research and development of deep aeration by using down-umbrella surface aerator are important for reducing investment and land occupation of the construction of wastewater treatment plants. This paper presents the numerical simulation of 3 type aerators with different structure by using CFD software. The stirring effects and power efficiency of each type aerator are analyzed and compared between the 3 type aerators. Experiment in small tank was carried out to confirm the CFD simulation.
Keywords:surface aerator for deep aeration  oxidation ditch  CFD
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号