首页 | 本学科首页   官方微博 | 高级检索  
     检索      

电解锰渣-页岩-粉煤灰烧结砖的研制
引用本文:张金龙,彭兵,柴立元,王佳,万斯.电解锰渣-页岩-粉煤灰烧结砖的研制[J].环境科学与技术,2011,34(1):144-147.
作者姓名:张金龙  彭兵  柴立元  王佳  万斯
作者单位:中南大学冶金科学与工程学院,湖南长沙,410083
基金项目:湖南省节能减排科技重大专项
摘    要:针对湖南湘潭竹埠港地区工业废渣的情况,进行了电解锰渣-页岩-粉煤灰体系烧结制砖的研制.确定了配比、烧结温度和保温时间对烧结砖性能的影响,通过SEM、EDS、抗压强度、毒性浸出、DTA和XRD等检测手段,对烧结前后砖体的结构及各项性能进行了检验.结果显示,电解锰渣、页岩和粉煤灰的配比为4:5:1、烧结温度为1000℃'保...

关 键 词:烧结  毒性浸出  抗压强度  浸出液

Sintering of Electrolysis Manganese Slag-Shale-Coal Ash for Brick
ZHANG Jin-long,PENG Bing,CHAI Li-yuan,WANG Jia,WAN Si.Sintering of Electrolysis Manganese Slag-Shale-Coal Ash for Brick[J].Environmental Science and Technology,2011,34(1):144-147.
Authors:ZHANG Jin-long  PENG Bing  CHAI Li-yuan  WANG Jia  WAN Si
Institution:ZHANG Jin-long,PENG Bing,CHAI Li-yuan,WANG Jia,WAN Si(School of Metallurgical Science and Engineering,Central South University,Changsha410083,China)
Abstract:Sintering of electrolysis manganese slag-shale-coal ash for brick was done in purpose of treating solid waste generated in Zhubugang District,Xiangtan City.Effects of composition,sintering temperature and holding time on the performance of brick were investigated.Structure and characteristics of the brick were detected by SEM,EDS,comprehensive strength tests,TCLP,DTA and XRD.Results showed that the optimal sintering process achieved at 1 000 ℃ sintering for 2 h in the ratio of electrolytic manganese slag,shale and coal ash of 4:5:1.Under the conditions,the compressive strength of the brick reached 22.64 MPa.Manganese concentration in the leachate reduced from 451.08 mg/L to 0.676 3 mg/L,which are in line with the national standard regulations.
Keywords:sintering  compressive strength  TCLP  leachate  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号