| 基于ANSYS的振动试验中螺栓连接分析 |
| |
| 引用本文： | 范爽,周莹.基于ANSYS的振动试验中螺栓连接分析[J].环境技术,2013(6):42-44. |
| |
| 作者姓名： | 范爽 周莹 |
| |
| 作者单位： | 中国电子科技集团第四十九研究所,哈尔滨150001 |
| |
| 摘 要： | 本文通过大型有限元分析软件ANSYS,对振动试验过程中所用到的螺栓连接构件进行计算和解析,从而得到螺栓连接的受力分布图。基于ANSYS的模拟实验得到了螺栓连接的破坏形式示意图,为更好的改善振动试验中螺栓所承受的载荷力提供一定的理论依据。
|
| 关 键 词： | ANSYS 螺栓连接 预应力 |
Analysis on the Bolt Connection in the Vibration Test Based on ANSYS |
| |
| FAN Shuang,ZHOU Ying.Analysis on the Bolt Connection in the Vibration Test Based on ANSYS[J].Environmental Technology,2013(6):42-44. |
| |
| Authors: | FAN Shuang ZHOU Ying |
| |
| Institution: | (China Electronics Technology group Corporation No. 49 Research Institute, Ha＇erbin 150001) |
| |
| Abstract: | Through the finite element analysis software ANSYS, this paper calculates and analyzes bolt connection elements used in the vibration test, in order to get the stress distribution of bolt connection. Based on the ANSYS, the failure form of bolt connection is obtained from the simulation experiment, which provides a theoretical basis to improve the bolt’s loading force in the vibration test. |
| |
| Keywords: | ANSYS bolt connection prestress |
| 本文献已被 维普 等数据库收录！ |
