| 冷-干直接抽取法CEMS冷凝器的选型 |
| |
| 引用本文： | 陈莹,章曙,刘德允.冷-干直接抽取法CEMS冷凝器的选型[J].中国环保产业,2010(5):48-51. |
| |
| 作者姓名： | 陈莹 章曙 刘德允 |
| |
| 作者单位： | 1. 江苏省烟气测量与应用工程技术中心,南京,210042
2. 南京埃森环境技术有限公司,南京,210042 |
| |
| 摘 要： | 探讨了烟气冷凝器的关键性能指标,提出烟气冷凝器脱水率、SO2组分丢失率和烟气出口露点温度等关键参数的计算公式,提出了适合不同工况条件下烟气冷凝器选型的依据和方法,为解决冷-干直接抽取法CEMS所面临的湿法脱硫后的高湿、低浓度SO2,及如何准确、客观地反映污染排放的现实问题,提供了一个合理的解决方案。
|
| 关 键 词： | CEMS 烟气冷凝器 脱水率 SO2组分丢失率 |
Model Selection for CEMS Condenser |
| |
| CHEN Ying,ZHANG Shu,LIU De-yun.Model Selection for CEMS Condenser[J].China Environmental Protection Industry,2010(5):48-51. |
| |
| Authors: | CHEN Ying ZHANG Shu LIU De-yun |
| |
| Institution: | 1 .Jiangsu Flue Gas Survey and Application Engineering Technical Center, Nanjing 210042; 2. Nanjing ASSEN Environmental Technology Co., Ltd, Nanjing 210042, China) |
| |
| Abstract: | The article discusses the key capability target of flue gas condenser, puts forward the calculating formula of key parameter, such as the dehydrating rate of flue gas condenser, losing rate of SO2 and temperature of dew point from outlet flue, puts forward the basis and method of model selection of flue gas condenser under different applicable working conditions and provides a reasonable solution in order to solve the high moisture, SO2 with low concentration and the reality problems on how to reflect objectively the pollution discharge after wet process of desulfurization by CEMS. |
| |
| Keywords: | CEMS |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
