| 膜生物膜工艺处理含盐工业废水 |
| |
| 引用本文： | 裴烨青,陈东辉,周恭明,鲁骎,周峰. 膜生物膜工艺处理含盐工业废水[J]. 环境工程, 2011, 29(4): 4-6 |
| |
| 作者姓名： | 裴烨青 陈东辉 周恭明 鲁骎 周峰 |
| |
| 作者单位： | 上海博士高环保设备工程有限公司,上海,200092 |
| |
| 摘 要： | 采用了膜生物膜工艺处理含盐羧甲基纤维素生产废水。接种污泥为普通污泥,经驯化使其适应含盐废水,在污泥驯化阶段,生物膜表现出极佳的盐度冲击后恢复能力。通过较长的水力停留时间(5～15 d)和较低的COD有机负荷(平均1.6 kg/(m3·d)左右),生物膜COD去除率基本达90%。膜池内,悬浮固体浓度基本保持在5 000 mg/L以内;通过聚偏氟乙烯中空纤维膜过滤,出水悬浮固体浓度保持在5 mg/L以内。膜污染可通过重复的气水反洗和定期的化学清洗得以缓解。
|
| 关 键 词： | 羧甲基纤维素 膜生物膜 含盐废水 工程应用 |
TREATMENT OF SALINE INDUSTRIAL WASTEWATER AT FULL SCALE WITH MBFR |
| |
| Abstract: | A combination of MBBR+MBR was applied in treating saline CMC process wastewater.The inoculated non-halophilic bacteria were acclimatised to the saline wastewater.During acclimation period,MBBR showed excellent recovery from salinity shock.Through long HRT(5-15 d) and low loading of COD(1.6 kg/(m3·d) on average),COD removal rate of around 90% was achieved in the MBBR tank in most instances.The PVDF hollow fiber membrane guaranteed the effluent MLSS below 10 mg/L,while the MLSS in the membrane tank was kept below 5 000 mg/L.Membrane fouling was effectively mitigated through regular air-water backwash and periodic chemical wash.As salinity had aggravated membrane fouling,dosing dilute NaClO into backwash water and strengthening the bottom aeration of the membrane tank helped to mitigate it. |
| |
| Keywords: | carboxymethyl cellulose（CMC） membrane biofilm reactor（MBFR） saline wastewater full-scale application |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《环境工程》浏览原始摘要信息 |
|
点击此处可从《环境工程》下载全文 |
|
