首页 | 本学科首页   官方微博 | 高级检索  
     

微生物燃料电池在水解酸化工艺运行性能评估中的应用
引用本文:唐嘉丽, 凌宇祥, 于广平, 刘坚. 微生物燃料电池在水解酸化工艺运行性能评估中的应用[J]. 环境工程学报, 2020, 14(12): 3408-3416. doi: 10.12030/j.cjee.201912086
作者姓名:唐嘉丽  凌宇祥  于广平  刘坚
作者单位:广州中国科学院沈阳自动化研究所分所,广州 511458
基金项目:国家自然科学基金重大项目(61890933);国家自然科学基金重点项目(61533002);羊城创新创业领军人才支持计划(2019006)
摘    要:为扩展水解酸化工艺运行性能在线评估的新方法,研究了微生物燃料电池(MFC)对于水解酸化体系正常及异常进水工况下运行情况的反馈性能,考察了MFC作为水解酸化工艺在线监测传感器的可行性。结果表明:在启动运行的第1阶段,将水解酸化体系进水碳氮比条件控制为40∶1时,主要污染物COD的去除率保持在50%,总氮平均去除率20%,MFC电信号也总体平稳;第2阶段,向水解酸化体系进水间歇施加一系列的低碳氮比(0.5∶1、0.5∶1、20∶1、8∶1、4∶1、2∶1、1∶1)冲击,在冲击施加期间,MFC电信号有非常明显的增强峰反馈,且最高电压值与进水中施加的低碳氮比冲击的比值呈线性关系。采用16S rDNA宏基因组高通量测序技术,对比分析了微生物燃料电池阳极室内微生物在接受碳氮比冲击前后的微生物菌群结构的差异,结果显示,多次低碳氮比冲击会促进MFC阳极生物膜中优势菌门厚壁菌门Firmicutes、拟杆菌门Bacteroidetes和阳极室悬浮物中优势菌门变形菌门Proteobacteria的富集,从而刺激产电。本研究结果可为MFC在水解酸化工艺运行性能评估中的应用提供参考。

关 键 词:微生物燃料电池   水解酸化   低碳氮比   电信号反馈   微生物菌群结构
收稿时间:2019-12-13

Application of microbial fuel cells in evaluation of the operation performance of hydrolytic acidification process
TANG Jiali, LING Yuxiang, YU Guangping, LIU Jian. Application of microbial fuel cells in evaluation of the operation performance of hydrolytic acidification process[J]. Chinese Journal of Environmental Engineering, 2020, 14(12): 3408-3416. doi: 10.12030/j.cjee.201912086
Authors:TANG Jiali  LING Yuxiang  YU Guangping  LIU Jian
Affiliation:Shenyang Institute of Automation in Guangzhou, Chinese Academy of Sciences, Guangzhou 511458, China
Abstract:In order to extending a new method for online evaluation of the operation performance of the hydrolysis and acidification process, the feedback performance of the microbial fuel cell (MFC) to the operation of the hydrolytic acidification system under normal and abnormal influent conditions was studied, and the feasibility of using MFC as an on-line monitoring sensor for the hydrolytic acidification process was investigated. The results showed that at the first stage of the start-up operation, when the carbon-nitrogen ratio in the influent of the hydrolysis acidification system was controlled at 40∶1, the average removal rate of main pollutants COD maintained at 50%, and the average removal rate of ammonia nitrogen was 20%, and the electrical signal of MFC was generally stable. At the second stage, a series of shocks with low carbon-nitrogen ratios (0.5∶1, 0.5∶1, 20∶1, 8∶1, 4∶1, 2∶1, 1∶1) were applied intermittently to the influent of hydrolyzed acidification system, during the application of the shock, the significantly enhanced peak feedback occurred in the MFC electrical signal, and a linear relationship was determined between the highest voltage value and the ratio of the low carbon-nitrogen shock applied to the influent. The 16S rDNA metagenome high-throughput sequencing technology was used to comparative analyze the difference of microbial community structure in the microbial fuel cell anode chamber before and after the carbon-nitrogen ratio shock. It was found that multiple low-carbon-to-nitrogen ratio shocks could promote the enrichment of the dominant phylum Firmicutes and Bacteroidetes in the anode biofilm of MFC, and the enrichment of the dominant phylum Proteobacteria in the suspension of anode chamber, thereby stimulate the electricity generation. The research can provide a reference for the application of MFC in the evaluation of the operation performance of the hydrolytic acidification process.
Keywords:microbial fuel cells  hydrolysis and acidification  low carbon-nitrogen ratio  electrical signal feedback  microbial community structure
点击此处可从《环境工程学报》浏览原始摘要信息
点击此处可从《环境工程学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号