Seasonal distribution of polar organic compounds in the urban atmosphere of two large cities from the North and South of Europe

Polar organic species, including n-alkanols, sterols, anhydrosugars, n-alkanoic acids, n-alkenoic acids and dicarboxylic acids were quantified to typify the composition of fine (PM_2.5) and coarse (PM_10–2.5) aerosols collected simultaneously at roadside and background sites in Oporto (Portugal) and Copenhagen (Denmark) during separate month-long intensive summer and winter campaigns. As a general trend, both cities exhibit roadside average concentrations higher than their correspondent urban background levels. The polar organics are more abundant in the fine fraction, exhibiting a seasonal pattern with high winter concentrations and low summer loads. Aerosols from both cities showed typical distributions of n-alkanols and n-alkanoic acids in the ranges C₁₂–C₂₈ and C₈–C₂₈, respectively. The <C₂₀ homologues, usually attributed to kitchen emissions, vehicular exhausts and microbial origins, dominated the fatty acid fraction. Linear alcohols were mainly represented by higher molecular weight homologues from vegetation waxes. Molecular tracer species for wood smoke (e.g. levoglucosan, mannosan and resinic acids) were found to contribute significantly to the urban aerosol, especially in winter. Ratios between these tracers indicated different biofuel contributions to the atmospheric particles of the two cities. Secondary constituents from both biogenic (e.g. pinonic acid) and anthropogenic precursors (e.g. phthalic and benzoic acids) were detected in both cities and seasons.     

Assessment of atmospheric pollution from toxic heavy metals in two cities in India

Atmospheric concentrations of Pb, Cd, Cu and Zn have been measured at different locations in Bombay. The concentration levels of these metals in blood and teeth of Bombay residents were also measured to assess the current and integrated exposure. Higher atmospheric concentrations were observed in higher vehicular traffic zones in Bombay. Environmental monitoring of Pb, Cd, Cu and Zn was also carried out at Moradabad, the largest production and exporting centre of brass wares in India. Surface soil concentrations of these metals were also measured in Moradabad and Bombay. The analysis of samples was carried out by differential pulse anodic stripping voltammetry (DPASV). The study indicates that automobile exhaust is the dominant source for heavy metals in the environment of Bombay whereas the brass industry is responsible for enhanced concentrations of these metals in Moradabad.     

Seasonal and spatial distribution of metals in surface sediment of an urban estuary

Aquatic pollution by metals is of concern because of various toxic effects to marine life. The Tolka Estuary, Co. Dublin, Ireland, is a typical Irish urban estuary. It has a significant metal loading originating from the urban environment. Results of a 25month analysis of cadmium, copper, lead and zinc spatial and temporal distribution over 10 sample locations in this estuary are presented in this paper. Metal concentrations were analysed using differential pulse polarography. Significant seasonal and spatial trends in metal distribution were observed over the 25months. Sediment metal concentrations gradually increased (30-120%) in spring to a maximum at the end of summer which was followed by a decrease in winter months (30-60%). Sediment organic matter (OM) concentrations exhibited similar seasonal trends and a positive correlation between OM and metal distributions was observed, implying OM had an influence on metal distributions over time.     

Use of scalp hair as indicator of human exposure to heavy metals in an electronic waste recycling area

Scalp hair samples were collected at an electronic waste (e-waste) recycling area and analyzed for trace elements and heavy metals. Elevated levels were found for Cu and Pb with geometric means (GMs) at 39.8 and 49.5 μg/g, and the levels of all elements were found in the rank order Pb > Cu ? Mn > Ba > Cr > Ni > Cd > As > V. Besides Cu and Pb, Cd (GM: 0.518 μg/g) was also found to be significantly higher compared to that in hair samples from control areas. Differences with age, gender, residence status and villages could be distinguished for most of the elements. The high levels of Cd, Cu and Pb were likely found to be originated from e-waste related activities, and specific sources were discussed. This study shows that human scalp hair could be a useful biomarker to assess the extent of heavy metal exposure to workers and residents in areas with intensive e-waste recycling activities.     

Assessment of Hg accumulation in fish and scalp hair in fishing communities along river Swat,Pakistan

Environmental Science and Pollution Research - Mercury (Hg) bioaccumulation in fish poses severe threats to the food safety and human health. This study was conducted to assess Hg bioaccumulation...     

Ambient air quality of two metropolitan cities of Pakistan and its health implications

The present study reports findings on TSP loading in the ambient air of two major cities in Pakistan – Karachi and Islamabad. Data for TSP were collected at one site in Karachi and two in Islamabad between 10 December 1998 and 08 January 1999. This article reports one of the highest TSP loadings recorded so far in any megacity of the world. During the study period, average daily TSP concentrations at the Karachi site ranged from 627 to 938 μg m⁻³ with a mean of 668 μg m⁻³. On four occasions TSP concentrations were >1000 μg m⁻³ (range 1031–1736 μg m⁻³). At the Islamabad sampling site in close proximity to the city's industrial sector, daily TSP concentrations varied in the range of 428–998 μg m⁻³ (mean 691 μg m⁻³). Even at a relatively remote site of the city (Saidpur), TSP loading was high (range 145–448 μg m⁻³; mean 275 μg m⁻³). By virtue of the WHO definition, the 24-h average TSP concentrations in a busy commercial site in Karachi and in the vicinity of an industrial sector in Islamabad were in “exceedance” by a factor of 4–8. At Saidpur, the remote site, the 24-h average TSP loading exceeded the WHO guideline of 120 μg m⁻³ by a factor of 1.2–3.7.     

Strategies for the promotion of cleaner and energy efficient technologies in the urban transport system in selected Asian cities

This paper presents key findings of a study conducted under Asian Regional Research Programme in Energy, Environment and Climate on least cost options to meet the projected transport service demand in eight selected Asian cities. It also presents the barriers to the adoption of the selected cleaner transport options. Furthermore, it discusses some policies and measures to promote the cleaner transport options. The study finds that high initial cost and lack of infrastructure (especially for compressed natural gas operated vehicles and mass rapid transit system) are the major barriers to the selected options.     

Mercury,methyl-mercury and selenium in scalp hair of inhabitants from Mediterranean areas

In this article the concentrations of Hg, Me-Hg and Se in scalp hair of persons from different geographical areas with different dietary habits, determined by the use of cold vapour atomic absorption spectrometry (CVAAS), radiochemical neutron activation analysis (RNAA) and gas chromatography (GC), are described.     

Trace metals in Ganges soft-shell turtle (Aspideretes gangeticus) from two barrage: Baloki and Rasul, Pakistan

The concentration of nine metals was measured in liver, kidney, heart, muscle, plastron, and carapace of Aspideretes gangeticus from Rasul and Baloki barrages, Pakistan. The results indicated that metal concentration were significant different among tissues of Ganges soft-shell turtles. However, higher concentrations of Co (5.12 μg/g) and Ni (1.67 μg/g) in liver, Cd (0.41 μg/g) in heart, Fe (267.45 μg/g), Cd (2.12 μg/g) and Mn (2.47 μg/g) in kidney, Cd (0.23 μg/g), Cu (2.57 μg/g), Fe (370.25 μg/g), Mn (5.56 μg/g), and Pb (8.23 μg/g) in muscle of A. gangeticus were recorded at Baloki barrage than Rasul barrage. Whereas mean concentrations of Pb (3.33 μg/g) in liver, Co (1.63 μg/g), Cu (11.32 μg/g), Pb (4.8 μg/g) and Zn (144.69 μg/g) in heart, Co (4.12 μg/g) in muscle, Ni (1.31 μg/g), Pb (2.18 μg/g), and Zn (9.78 μg/g) in carapace were recorded higher at Rasul barrage than Baloki barrage. The metals followed the trend Fe > Zn > Ni > Cu > Mn > Pb > Cr > Co > Cd. Metals of toxicological concern such as Cr, Pb, and Cd were at that level which can cause harmful effects to turtles. The results provide baseline data of heavy metals on freshwater turtle species of Pakistan.     

Relationship between heavy metals concentrations in egret species,their environment and food chain differences from two Headworks of Pakistan

Concentration of ten metals (Cd, Cr, Co, Cu, Fe, Li, Mn, Ni, Pb and Zn) were analyzed in the egg contents, prey and soil samples of little egret (Egretta garzetta) and cattle egret (Bubulcus ibis) from two Headworks to determine habitat and species-specific differences; to assess the importance of prey and habitat contamination as an exposure source for heavy metals. Concentration of Cu, Mn, Cr and Pb in egg contents, Fe, Co, Cu, Mn, Zn in prey and Fe, Co, Cu, Ni, Li in surface soils were significantly different (P < 0.05). Mean metal concentrations of Cr, Pb and Cd were relatively higher in little egret whereas Cu and Mn were higher in the egg contents of cattle egret. The mean concentrations of Cu, Mn and Zn were higher in prey samples of cattle egrets and Cr, Cd and Pb in prey samples of little egrets. In soil samples collected from little egret heronries metal concentrations were higher except Cu and Ni. Correlation Analysis and Hierarchical Agglomerative Cluster Analysis (HACA) identified relatively similar associations of metals and their source identification. Metals such as Fe, Cu, Mn, and Li were related with geochemical origin from parent rock material as well as anthropogenic input whereas Cr, Cd, Pb, Ni, Co and Zn were associated mostly with anthropogenic activities. The study suggested that eggs are useful bio-monitor of local heavy metal contamination.     

Size distribution of metals in urban aerosols in Seville (Spain)

The size distribution of metals in aerosols has been studied in 12 areas of the city of Seville. Urban particles were collected with a high-volume sampling system equipped with a cascade impactor, which effectively separates the particulate matter into six-size ranges. Forty-one samples were collected in spring 1996. Each filter was extracted with a mixture of nitric and percloric acids. The acid solutions of the samples were analysed in six-particle fractions by inductively coupled plasma atomic emission spectrometry (ICP-AES). The impactor stage fractionation of particles shows a typical bimodal distributions, one corresponding to the fine mode below 1 μm (55%), and the other to the coarse mode around 10 μm (32%). With regard to the size distribution of metals, we concluded that potentially toxic metals, such as nickel, lead and cadmium are mainly accumulated in the smaller particles, with percentages of 72.6, 69.4 and 63.8%, respectively. Lead have a concentration of 63.7 ng m⁻³, more than copper and manganese (26.7 and 16.5 ng m⁻³) and above all more than nickel, cobalt and cadmium (1.97, 0.54 and 0.32 ng m⁻³).     

Spatio-temporal distribution of metals in household dust from rural,semi-urban and urban environments in the Niger Delta,Nigeria

Concentrations of metals in household dust samples from rural, semi-urban and urban zones of the Niger Delta in Nigeria were measured during both 2009 and 2014 with the aim of providing information on changes in the concentrations, distribution patterns, sources and risks of metals in these zones. The concentrations of metals in the dust samples were quantified by using inductively coupled plasma atomic emission spectrophotometry (ICP-AES) after digestion with aqua regia. The measured concentrations (mg kg^?1) of metals in the three zones within the study periods were as follows: <LOQ–21.2; <LOQ–182; 7.90–265; <LOQ–117; <LOQ–471; 3.37–2310; 0.35–7.9; 4.25–365; 6.78–61,600; 219–37,700; and 1180–18,000 for Cd, Pb, Ba, Cr, Ni, Cu, Co, Mn, Zn, Fe and Al, respectively. The results from the two periods indicate significant changes in the concentrations, distribution patterns and risk factors which reflects a deterioration of the quality of the household environment over this time span. The hazard index (HI) values calculated for children were greater than 1 indicating significant non-cancer risks for these subjects in these areas. The HI values for adults were less than 1 and consequently do not pose a significant risk. The carcinogenic risk levels for exposure to metals for both adults and children in these zones were below the range specified as safe by the US EPA (×10^?6 and ×10^?4) thereby indicating a low cancer risk. The sources of metals in household dust from these zones include emissions from industries, traffic, artisanal workshops and releases from household furniture, metal-based fittings, metal roofing and pesticides.     

Size distribution and sources of trace metals and n-alkanes in the Athens urban aerosol during summer

Size-resolved, 24-h aerosol samples were collected from June–July 2001 by means of an Andersen high-volume cascade impactor. Sampling was conducted in a central avenue (Patission) characterised by heavy traffic, 21 m above street level, in the Athens city centre. Samples were analysed by atomic absorption spectrometry and gas chromatography to determine the size distribution of nine metallic elements (Cd, Pb, V, Ni, Mn, Cr, Cu, Fe, Al) and n-alkanes (with carbon numbers in the range 18–35). The aerosol mass median diameter (MMD) was calculated by means of probit analysis on the cumulative mass concentration size distribution for each metals and n-alkane. The total n-alkane mass concentration (TNA) in total suspended particles (TSP) ranged from 72 to 1506 ng m⁻³ while the total metal concentration ranged from 5.6 to 28.6 μg m⁻³. The results showed that metals such as Cd, V and Ni are characterised by a MMD <1 μm, while the MMD for Pb and Mn are ∼1 μm. Such metals are generally considered to have anthropogenic emission sources. Other metals such as Al, Fe, Cu and Cr were found to have MMD=2–6 μm, which generally originate from soil dust or mechanical abrasion processes. The Carbon number profile of n-alkane compounds showed a strong anthropogenic source with only a minor biogenic influence. The concentration of most n-alkanes was characterised by high variability during the sampling period, in contrast to the concentration of most trace metals. Most n-alkanes had a unimodal size distribution with MMD=1–2 μm similar to those of some trace metals (Pb, Mn), which originate mostly from vehicle emissions. This is a strong indication that these species have a common source. Finally, gas–particle partitioning of n-alkanes was also examined for different particle sizes by means of the relationship between the partition constant K_p and saturation vapour pressure (p_L⁰) as proposed by current sorption models.     

A comparison of contaminant plume statistics from a Gaussian puff and urban CFD model for two large cities

This paper quantitatively assesses the spatial extent of modeled contaminated regions resulting from hypothetical airborne agent releases in major urban areas. We compare statistics from a release at several different sites in Washington DC and Chicago using a Gaussian puff model (SCIPUFF, version 1.3, with urban parameter settings) and a building-resolving computational fluid dynamics (CFD) model (FAST3D-CT). For a neutrally buoyant gas source term with urban meteorology, we compare near-surface dosage values within several kilometers of the release during the first half hour, before the gas is dispersed beyond the critical lethal level. In particular, using “fine-grain” point-wise statistics such as fractional bias, spatial correlations and the percentage of points lying within a factor of two, we find that dosage distributions from the Gaussian puff and CFD model share few features in common. Yet the “coarse-grain” statistic that compares areas contained within a given contour level reveals that the differences between the models are less pronounced. Most significant among these distinctions is the rapid lofting, leading to enhanced vertical mixing, and projection downwind of the contaminant by the interaction of the winds with the urban landscape in the CFD model. This model-to-model discrepancy is partially ameliorated by supplying the puff model with more detailed information about the urban boundary layer that evolves on the CFD grid. While improving the correspondence of the models when using the “coarse-grain” statistic, the additional information does not lead to quite as substantial an overall agreement between the models when the “fine-grain” statistics are compared. The taller, denser and more variable building landscape of Chicago created increased sensitivity to release site and led to greater divergence in FAST3D-CT and SCIPUFF results relative to the flatter, sparser and more uniform urban morphology of Washington DC.     

Adsorption,desorption, potential and selective distribution op heavy metals in selected soils of japan

Abstract

Adsorption, desorption, potential and selective distribution of Cu, Zn, Cd, Pb and Ni were investigated in three typical soils of Japan under flooded condition.

The results indicate that the sorption of all heavy metals was linear upto the maximum concentration (500 μg/g soil) employed in the present studies in all the soils. The magnitude of sorption in general was in the order of Pb > Cu > Zn > Cd > Ni. The adsorption coefficients showed wide variations among different soils as well as metal ions. The hysteresis of sorption and desorption by KNO₃ was well pronounced for both the metal ions and the soils. The desorption rate was greater than the fixation rate indicating the predominance of the chemosorption over physical processes. The major portion of sorbed metals were retained in the unextractable form, which over all accounted for more than 50% of the sorbed metals.     

Spatial distribution of heavy metals in urban soils of Naples city (Italy)

Concentrations of surface and sub-surface soil Cu, Cr, Pb and Zn in the Naples city urban area were measured in 1999. Contourmaps were constructed to describe the metals spatial distribution. In the most contaminated soil samples, metals were speciated by means of the European Commission sequential extraction procedure. At twelve sites, Cu, Pb and Zn levels in soil were compared with those from a 1974 sampling. Many surface soils from the urban area as well as from the eastern industrial district contained levels of Cu, Pb and Zn that largely exceeded the limits (120, 100 and 150 mg kg(-l) for Cu, Pb and Zn, respectively) set for soils of public, residential and private areas by the Italian Ministry of Environment. Chromium values were never above regulatory limits(120 mg kg(-1)). Copper apparently accumulates in soils contiguous to railway lines and tramway. Cu and Cr existed in soil mainly inorganic forms (-68%), whereas Pb occurs essentially as residual mineral phases (77%). The considerable presence of Zn in the soluble, exchangeable and carbonate bound fraction (23%) suggests this element has high potential bioavailability and leachability through the soil. Concentrations of Cu, Pb and Zn have greatly increased since the 1974 sampling, with higher accumulation in soils from roadside fields.     

Distribution and coassociations of selected metals in seals of the Antarctic

Zinc, Cu, Cd, Pb, Ag, Ni, Co, Cr, Fe and Mn concentrations in some tissues of crabeater seal (Lobodon carcinophagus), leopard seal (Hydrurga leptonyx) and Weddell seal (Leptonychotes weddelli) from the Antarctic were determined. Distinct inter-tissue differences in metal concentrations in seals were observed; liver contained maximum levels of Zn, Cu, Ag and Mn, whilst kidney showed the highest levels of Cd, Ni and Co. Muscle was characterized by low concentrations of all the elements analyzed. The metal concentrations in the vertebrates analyzed were compared with those for organisms originating from various aquatic areas. Significant correlations were found between the levels of several of the metals analyzed, e.g. between renal and hepatic concentrations of Zn and Cd. Strong relationships between the hepatic concentrations of some metals were found, e.g. Cd-Zn. These two metals also showed a significant coassociation in their renal concentrations. The slope of the regression line for renal Cd/Zn was about three times higher than the hepatic one and this may reflect a relatively high Cd exposure, probably from specific food (squid and krill) provenance, of the seals analyzed.     

Current and future emissions of selected heavy metals to the atmosphere from anthropogenic sources in Europe

Current atmospheric emissions of As, Cd, Cr, Ni, and Pb (reference year 2000) from major anthropogenic sources in Europe are presented in this paper. Combustion of fuels in stationary sources was the main emission source for As, Cd, Cr, and Ni (more than a half of the total anthropogenic emissions), while combustion of gasoline was the main source of for lead. There is a continuous reduction of heavy metal emissions in Europe during the last 40 years. Better knowledge of heavy metal sources, emissions, pathways, and fate in the environment, and progress in developing efficient emission control equipment has resulted in more efficient regulatory efforts to curb heavy metal emissions from anthropogenic sources very substantially. There is a potential for further reduction of these emissions until the year 2010 up to about 40% for As, Cd, Cr, and Ni and about 57% for Pb, as estimated within various emission scenarios presented in the paper.     

The variability of polychlorinated biphenyls levels in urban soils from five European cities

The concentration of PCBs in topsoils from five European cities was assessed and the highest levels were found in Glasgow (Scotland), followed by Torino (Italy), Aveiro (Portugal), Ljubljana (Slovenia) and Uppsala (Sweden). All cities showed the presence of local sources in addition to diffuse contamination from global atmospheric transport. The association of general soil parameters with PCBs in Glasgow and with heavier congeners in Torino and Ljubljana indicates that retention of these compounds is occurring. The profiles obtained resemble Aroclor 1254 and 1260, which are important local sources. Nevertheless, differences in PCB profiles were observed among cities, due to the combined effects of the age of the contamination (which determines the time available for volatilisation and degradation), different sources of PCBs and differences in climate (which influence volatilisation and deposition).     

Size distribution and source identification of total suspended particulate matter and associated heavy metals in the urban atmosphere of Delhi

A study of the atmospheric particulate size distribution of total suspended particulate matter (TSPM) and associated heavy metal concentrations has been carried out for the city of Delhi. Urban particles were collected using a five-stage impactor at six sites in three different seasons, viz. winter, summer and monsoon in the year 2001. Five samples from each site in each season were collected. Each sample (filter paper) was extracted with a mixture of nitric acid, hydrochloric acid and hydrofluoric acid. The acid solutions of the samples were analysed in five-particle fractions by atomic absorption spectrometry (AAS). The impactor stage fractionation of particles shows that a major portion of TSPM concentration is in the form of PM0.7 (i.e. <0.7microm). Similarly, the most of the metal mass viz. Mn, Cr, Cd, Pb, Ni, and Fe are also concentrated in the PM0.7 mode. The only exceptions are size distributions pertaining to Cu and Ca. Though, Cu is more in PM0.7 mode, its presence in size intervals 5.4-1.6microm and 1.6-0.7microm is also significant, whilst in case of Ca there is no definite pattern in its distribution with size of particles. The average PM10.9 (i.e. <10.9microm) concentrations are approximately 90.2%+/-4.5%, 81.4%+/-1.4% and 86.4%+/-9.6% of TSPM for winter, summer and monsoon seasons, respectively. Source apportionment reveals that there are two sources of TSPM and PM10.9, while three and four sources were observed for PM1.6 (i.e. <1.6microm) and PM0.7, respectively. Results of regression analyses show definite correlations between PM10.9 and other fine size fractions, suggesting PM10.9 may adequately act as a surrogate for both PM1.6 and PM0.7, while PM1.6 may adequately act as a surrogate for PM0.7.