Activated carbon from industrial solid waste as an adsorbent for the removal of Rhodamine-B from aqueous solution: kinetic and equilibrium studies

The activated carbon was prepared using industrial solid waste called sago waste and physico-chemical properties of carbon were carried out to explore adsorption process. The effectiveness of carbon prepared from sago waste in adsorbing Rhodamine-B from aqueous solution has been studied as a function of agitation time, adsorbent dosage, initial dye concentration, pH and desorption. Adsorption equilibrium studies were carried out in order to optimize the experimental conditions. The adsorption of Rhodamine-B onto carbon followed second order kinetic model. Adsorption data were modeled using both Langmuir and Freundlich classical adsorption isotherms. The adsorption capacity Q0 was 16.12 mg g(-1) at initial pH 5.7 for the particle size 125-250 microm. The equilibrium time was found to be 150 min for 10, 20 mg l(-1) and 210 min for 30, 40 mg l(-1) dye concentrations, respectively. A maximum removal of 91% was obtained at natural pH 5.7 for an adsorbent dose of 100mg/50 ml of 10 mg l(-1) dye concentration and 100% removal was obtained when the pH was increased to 7 for an adsorbent dose of 275 mg/50 ml of 20 mg l(-1) dye concentration. Desorption studies were carried out in water medium by varying the pH from 2 to 10. Desorption studies were performed with dilute HCl and show that ion exchange is predominant dye adsorption mechanism. This adsorbent was found to be both effective and economically viable.     

Assessment of the importance of sorption for steroid estrogens removal during activated sludge treatment

Distribution coefficients (K(d)) between water and activated sludge particles (f(oc)=27.7+/-0.1%) were measured for the steroid estrogens (SE), estrone (E1), 17beta-estradiol (E2) and 17alpha-ethinylestradiol (EE2) in batch experiments. Experimental concentration levels ranged from environmentally realistic low ng/l to the high microg/l. In this range K(d)s were independent of their water concentration. The experimentally obtained K(d)s (with 95% confidence intervals) were 402+/-126 l/kg, 476+/-192 l/kg and 584+/-136 l/kg for E1, E2 and EE2, respectively. K(d)s were used to estimate the fraction of the total SE concentration that is expected to be sorbed in the activated sludge treatment tanks of a typical STP assuming equilibrium conditions. Assuming a suspended solids concentration of 4 g/l dissolved solids (ds), it was estimated that 61+/-9%, 66+/-13% and 70+/-6% of the total concentration of E1, E2 and EE2, respectively, would be sorbed during activated sludge treatment. The fraction of the SEs that was expected to be sorbed to suspended sludge particles in the effluents from a typical Danish STP was estimated to be only 0.20+/-0.06%, 0.24+/-0.10% and 0.29+/-0.07% of the total concentration of E1, E2 and EE2, respectively, at a suspended solids concentration of 5 mg/lds. For a typical STP the removal of steroid estrogens with excess sludge was estimated to be only 1.5-1.8% of the total loading if equilibrium conditions exists. Sorption is therefore not important for the fate of SEs in STPs compared to biodegradation.     

Fluoride removal performance of a novel Fe-Al-Ce trimetal oxide adsorbent

A trimetal oxide was developed as a fluoride adsorbent by coprecipitation of Fe(II), Al(III) and Ce(IV) salt solutions with a molar ratio of 1:4:1 under alkaline condition. The material retained amorphous structure and maintained relatively stable fluoride adsorption performance at calcination temperatures lower than 600 degrees C. The optimum pH range for fluoride adsorption was 6.0-6.5 and the adsorbent also showed high defluoridation ability around pH 5.5-7.0, which is preferable for actual application. A high fluoride adsorption capacity of 178 mg g(-1) was acquired under an equilibrium fluoride concentration of 84.5 mg l(-1), adsorbent dose of 150 mg l(-1) and pH 7.0. The adsorption isotherm could be better described by the two-site Langmuir model than the one-site model, suggesting the existence of two types of active sites on the adsorbent surface. Coexistence of high concentrations of phosphate or arsenate only led to partial inhibition of fluoride adsorption, which further suggests the existence of heterogeneous adsorption sites. Sulfate and chloride did not affect fluoride adsorption, and nitrate influenced it only when the concentration of NO(3)(-)-N exceeded 50 mg l(-1). A high desorption efficiency of 97% was achieved by treating fluoride loaded Fe-Al-Ce oxide with NaOH solution at pH 12.2. A column experiment using the adsorbent fabricated into 1mm pellets was performed at an initial fluoride concentration of 5.5 mg l(-1), space velocity of 5h(-1) and pH of 5.8, and 2240 bed volumes were treated with the effluent fluoride under 1.0 mg l(-1).     

Effect of 17beta-estradiol on the reproduction of Japanese medaka (Oryzias latipes)

Estrogenic compounds such as 17beta-estradiol (E2) and its analogs are present in the aquatic environment and can adversely affect the reproductive systems of aquatic organisms. Although E2 has been detected at a maximum concentration of 64 ng/l in effluents of sewage treatment works (STWs), few reports address the associated effects on reproduction in fish. Therefore, we exposed adult medaka (Oryzias latipes) to mean measured E2 concentrations of 29.3, 55.7, 116, 227, and 463 ng/l for 21 d and assessed the effects on the egg number and fertility of paired medaka during the exposure period. In addition, we determined the hepatic vitellogenin (Vtg) concentration and histologically assessed the gonads of these fish. The number of egg produced and fertility of the paired medaka exposed to 463 ng/l E2 were significantly less compared with those of the control fish. Males in all treatment groups had developed testis-ova. Males treated with E2 concentrations = 55.7 ng/l contained relating great concentrations of hepatic Vtg. Therefore, although only the greatest E2 concentration tested in our study affected fecundity and fertility, effects of E2 were observed on induction of Vtg and testis-ova in male medaka exposed to environmentally relevant concentrations of E2.     

Occurrence and photochemical degradation of 17alpha-ethinylestradiol in Acushnet River Estuary

17alpha-Ethinylestradiol (EE2), a major constituent of common contraceptive pills, and three other estrogenic hormones, estrone (E1), 17beta-estradiol (E2) and mestranol (MeEE2) have been determined in Acushnet River Estuary seawater using a GC-MS technique. Among three estrogenic compounds detected, EE2 has the highest concentration, up to 4.7 ng/l, at which EE2 may affect lobster and other fish abundance in the coastal seawater due to its high biological activity on fish feminization. Two natural estrogenic hormones, E1 and E2 have also been found in the estuary at concentrations up to 1.2 ng/l and 0.83 ng/l, respectively. Although EE2 is persistent to microbial degradation, it can undergo a rapid photodegradation in estuarine seawater under natural sunlight irradiation, with a half-life of less than 1.5 days in spring sunny days.     

Sorption and desorption of three endocrine disrupters in soils

Sorption of the estrogens estrone (E1), 17beta-estradiol (E2) and 17alpha-ethynylestradiol (EE2) on four soils was examined using batch equilibrium experiments with initial estrogen concentrations ranging from 10 to 1000 ng mL-1. At all concentrations, >85% of the three estrogens sorbed rapidly to a sandy soil. E1 sorbed more strongly to soil than E2 or EE2. Partial oxidation of E2 to E1 was observed in the presence of soils. Autoclaving was more effective at reducing this conversion than inhibition with sodium azide or mercuric chloride, and had little effect on sorption, relative to the chemical microbial inhibitors. Sorption of EE2 was greater for fine-textured than coarse-textured soils, but greater than 90% of EE2 sorbed onto all four soils. The greatest degree of desorption of estrogens from the sandy soil occurred with the lowest initial concentration of 10 ng mL-1 and reached levels >or=80% for E1 and E2. Desorption of EE2 was greater in coarser textured soils than finer-textured soils. Again, relative desorption from all soils was greatest with low initial concentrations. Therefore, at environmentally relevant concentrations, estrogens quickly sorb to soils, and soils have a large capacity to bind estrogens, but these endocrine-disrupting compounds can become easily desorbed and released into the aqueous phase.     

Pesticides in precipitation in the Gdańsk region (Poland)

Selected organonitrogen, organophosphorus and organochlorine pesticides have been determined in precipitation samples collected at 10 sites in the Gdańsk region (northern Poland) over a period of one year (1998). Compounds which were detected most often included simazine (0.11-5.80 ng/l), fenitrothion (0.1-2.10 ng/l), chlorfenvinfos (0.1-1.30 ng/l), gamma-HCH (0.012-5.06 ng/l), heptachlor epoxide (0.05-3.28 ng/l) and aldrin (0.02-3.28 ng/l). The pesticide concentrations in precipitation samples revealed seasonal fluctuations, with higher concentrations observed during the application periods (June and July). The concentrations observed were also affected by the inflow of polluted air masses from the southwest. The total pesticide concentration in the precipitation samples was strongly related to the abundance of green areas in the vicinity of the sampling sites. A weak correlation was also found between the total concentration of organonitrogen and organophosphorus pesticides, and the total concentration of organochlorine pesticides in the samples collected.     

A comparative study on the biosorption characteristics of some yeasts for Remazol Blue reactive dye

Biosorption capacities and rates of different kinds of dried yeasts (Saccharomyces cerevisiae, Schizosaccharomyces pombe, Kluyveromyces marxianus, Candida sp., C. tropicalis, C. lipolytica, C. utilis, C. quilliermendii and C. membranaefaciens) for Remazol Blue reactive dye from aqueous solutions were compared under laboratory conditions as a function of initial pH and initial dye concentration. Optimum initial biosorption pH was determined as 2 for all the yeasts. All the yeast species showed comparable and very high dye sorption at 100 mg/l initial dye concentration. The equilibrium sorption capacity of the biomass increased with increasing initial dye concentration up to 400 mg/l for Candida sp. C. lipolytica and C. tropicalis; up to 300 mg/l for C. quilliermendii and C. utilis and up to 200 mg/l for S. cerevisiae, S. pombe, K. marxianus and C. membranaefaciens while the adsorption yield of dye showed the opposite trend for all the yeasts. Among the nine yeast species, C. lipolytica exhibited the highest dye uptake capacity (Q(0) = 250 mg/g). Both the Freundlich and Langmuir adsorption models were found suitable for describing the biosorption of the dye by all the Candida yeasts (except C. membranaefaciens). The results indicated that the dye uptake process followed the pseudo-second-order kinetics for each dye-yeast system.     

Assessing chronic toxicity of bisphenol A to larvae of the African clawed frog (Xenopus laevis) in a flow-through exposure system

A number of currently used industrial chemicals are estrogenic, and therefore have potential to disrupt sexual differentiation in vertebrate wildlife during critical developmental windows. We assessed the effect of larval exposure to bisphenol A (BPA) on growth, development and sexual differentiation of the gonad in the African Clawed frog, Xenopus laevis. Larvae were maintained in flow-through conditions at 22 +/- 1 degrees C and exposed to BPA at mean measured concentrations of 0.83, 2.1, 9.5, 23.8, 100, and 497 microg/l, from developmental stages 43/45-66 (completion of metamorphosis). Each test concentration, plus dilution water control (DWC) and positive control (17beta-estradiol (E2), 2.7 microg/l) employed four replicate test vessels with 40 larvae per tank. Individual froglets were removed from test vessels upon reaching stage 66, and the study was terminated at 90 days. Froglets were dissected and sex was determined by inspection of gross gonadal morphology. Test concentrations of BPA had no effect on survival, growth, developmental stage distributions at exposure days 32 and 62, or mean time to completion of metamorphosis, compared to DWC. Analysis of post-metamorphic sex ratio, determined by gross gonadal morphology, indicated no significant deviations from expected (50:50) sex ratio, in DWC or any BPA test concentration. In contrast, exposure of larvae to (E2) resulted in feminisation, with sex ratio deviating significantly (31% male, replicates pooled). Exposure to BPA in the concentration range 0.83-497 microg/l in flow-through conditions had no observable effect on larval growth, development or sexual differentiation (as determined by gross gonadal morphology) in this study.     

Steroid estrogens in ocean sediments

This paper gives results from a study measuring the abundance of steroid hormones in ocean sediments in the proximity of a deep ocean sewage outfall. The outfall is discharge point for an enhanced primary sewage treatment plant and sediment samples were taken adjacent and 7 km from the outfall. All samples contained steroid estrogens at nanogram per gram levels with higher concentrations at the 7 km sampling site. The concentration of estrone ranged from (0.16-1.17 ng/g), 17beta-estradiol (0.22-2.48 ng/g) and the synthetic 17alpha-ethinylestradiol (<0.05-0.5 ng/g). The values detected correspond with estimates based on the proportion of estrogens sorbed to particles in the effluent and the expected proportion of particles originating from sewage in the ocean sediments. The results suggest that estrogens associated with the particulate fraction aggregate on contact with high ionic strength seawater and settle to the seafloor after discharge through deep ocean outfalls.     

Occurrence and treatment trials of endocrine disrupting chemicals (EDCs) in wastewaters

This study demonstrates that both synthetic and natural endocrine disrupting chemicals (EDCs) (e.g., bisphenol A, estrone and 17beta-estradiol) were found in the crude wastewaters from two wastewater treatment works (WwTWs). Conventional biological processes can lower EDCs concentrations to several tens to hundreds ngl(-1). Since natural EDCs (e.g., estrone and 17beta-estradiol) have biological activity and adverse impact on the environment at extremely low concentrations (several tens of ngl(-1)), further treatment after conventional biological processes is required. Preliminary trials with ferrate(VI) and electrochemical oxidation process demonstrated that both processes can effectively reduce EDCs to very low levels, ranging between 10 and 100ngl(-1), but the former is more effective than the latter to reduce COD concentration in wastewater for given studying conditions.     

Waste Fe(III)/Cr(III) hydroxide as adsorbent for the removal of Cr(VI) from aqueous solution and chromium plating industry wastewater

Fe(III)/Cr(III) hydroxide, a waste material from the fertilizer industry, has been used for the adsorption of Cr(VI) from aqueous solution, over a range of initial metal ion concentrations (5-30 mg litre(-1)), agitation times (1-180 min), adsorbent dosages (100-1200 mg per 50 ml), temperatures (24, 29 and 38 degrees C) and pH values (4.5-10). The adsorption of Cr(VI) increased with the initial concentration of Cr(VI) and with temperature. The process of uptake follows both the Langmuir and the Freundlich isotherm models. The applicability of Lagergren and empirical kinetic models has also been investigated. Almost quantitative removal of Cr(VI) at 10 mg litre(-1) in a 50-ml solution by 500 mg of adsorbent was found at an equilibrium pH of 5.6. The efficiency of chromium removal was also tested using wastewater from the chromium plating industry.     

As(V) adsorption on amorphous iron oxide: Triple layer modelling

The adsorption of As(V) by amorphous iron oxide was investigated at 25°C, 0.01 M NaNO₃ background electrolyte as a function of solution pH(4–10) at three initial As(V) concentrations and two Fe(III) concentrations. As(V) adsorption increased with decreasing pH. A modified Langmuir isotherm has been used for describing an equilibrium partition existing between solid and liquid phases. The triple-layer model was used for simulating As(V) adsorption on iron oxide surface. This model was able to describe As(V) adsorption over the pH range 4–10, all at the concentrations of As(V) and Fe(III) studied. =Fe(H₂AsO₄)⁰, = Fe(HAsO₄)⁻ and = Fe(AsO₄)²⁻ have been shown through simulation with inner-sphere complexation products to be more consistent with experimental adsorption observations than complexation with other surface species.     

磺胺类抗生素的活性炭吸附过程研究

采用煤质活性炭对3种磺胺类抗生素(浓度在1～2 mg/L之间)的吸附处理过程做了深入研究。结果表明,3种磺胺类抗生素在2～3 h之内可以达到吸附平衡;准一级动力学对其吸附动力学的模拟结果良好,且SMZ、SM1和SM2的一级吸附动力学常数k1分别为0.029、0.024和0.017 min-1,3种抗生素的平衡吸附容量分别为3.75、3.23和2.95 mg/g,SMZ的平衡吸附容量最大,最先达到吸附平衡,且平衡浓度也最低。3种磺胺类抗生素的吸附过程中,吸附前期的阻力主要是内扩散,而吸附后期较低浓度的抗生素吸附过程的阻力主要来自于膜扩散;采用Freundlich等温线方程描述3种磺胺类抗生素的吸附过程更为合理。     

Polychlorinated biphenyls, organochlorinated pesticides, and polybrominated diphenyl ethers in the cerebral cortex of wild river otters (Lontra canadensis)

We measured the levels of ortho-substituted polychlorinated biphenyls (PCB), organochlorinated pesticides (OCP), and polybrominated diphenyl ethers (PBDE) in the cerebral cortex of river otters (Lontra canadensis) trapped from Ontario and Nova Scotia between 2002 and 2004. The mean concentration of total PCBs was 70.9+/-12.1 ng/g l.w., and congeners 153, 180 and 138 accounted for nearly 60% of the sum. The mean concentration of total OCPs was 21.2+/-3.7 ng/g l.w., and hexachlorobenzene (32.6% of total) and DDE (28.1%) accounted for the majority. The mean concentration of total PBDEs was 3.2+/-0.6 ng/g l.w., and congeners 99 (44.9%), 153 (30.5%), and 100 (24.7%) were measured at the indicated percentages. There was no relationship between these residue data and concentrations of brain mercury or neurochemical receptors and enzymes as determined in earlier studies on these same animals.     

泥炭树脂颗粒对水溶液中十二烷基苯磺酸钠的去除

泥炭树脂颗粒对水溶液中十二烷基苯磺酸钠 (SDBS)具有很好的去除效果。数据分析表明 ,Freundlich和 Langmuir吸附等温方程可以很好地描述这一过程。通过 L angmuir方程计算出颗粒对 SDBS的最大吸附量为 3 3 .3 3 mg·g- 1。在试验条件下 ,吸附量随着 SDBS的初始浓度增加而增加 ,当溶液的初始 p H在 4～ 8的范围时 ,颗粒对 SDBS吸附量变化很小。溶液的初始浓度对吸附速率产生明显影响 ,浓度越低吸附速率越快 ,达到吸附平衡所需的时间越短。准二级动力学模型能够很好地描述颗粒对 SDBS的吸附过程。     

Degradation of azo dye Procion Red MX-5B by photocatalytic oxidation

The photocatalytic oxidation (PCO) of a monoazo dye Procion Red MX-5B under various physico-chemical conditions was investigated. Degradation of the dye by PCO was enhanced by augmentation in UV intensity, titanium dioxide and hydrogen peroxide concentrations but was inhibited by increase in initial dye concentration. The PCO process was affected by pH in a peculiar way. In the presence of 100 mg/l of TiO2 and the absence of H2O2, the highest reaction rate was observed when the initial pH was 10. With 500 mg/l of TiO2 and 10 mM of H2O2, the reaction was the fastest at initial pH of 3-5. The optimal conditions for the degradation of the dye, at an UV intensity of 17 mW/cm2, were determined to be: TiO2 concentration, 500 mg/l; initial H2O2 concentration, 10 mM; initial pH, 5.0. Monitoring of TOC loss showed that the dye was mineralized by 90% within 80 min under these conditions. Nevertheless, the persistence of a low level of TOC indicated that mineralization was not complete and dead-end product(s) which was (were) resistant to PCO might have accumulated.     

Adsorption characteristics of 2,4-dichlorophenoxyacetic acid (2,4-D) from aqueous solution on powdered activated carbon

The removal of 2,4-dichlorophenoxyacetic acid (2,4-D), one of the most commonly used phenoxy acid herbicides, from aqueous solution was studied by using acid-washed powdered activated carbon (PAC) as an adsorbent in a batch system. Adsorption equilibrium, kinetics, and thermodynamics were investigated as a function of initial pH, temperature, and initial 2,4-D concentration. Powdered activated carbon exhibited the highest 2,4-D uptake capacity of 333.3 mg g(-1) at 25 degrees C and an initial pH value of 2.0. Freundlich, Langmuir, and Redlich-Peterson isotherm models were used to express the equilibrium data of 2,4-D depending on temperature. Equilibrium data fitted very well to the Freundlich equilibrium model in the studied concentration range of 2,4-D at all the temperatures studied. Three simplified models including pseudo-first-order, pseudo-second-order, and saturation-type kinetic models were used to test the adsorption kinetics. It was shown that the adsorption of 2,4-D on PAC at 25, 35, and 45 degrees C could be best fitted by the saturation-type kinetic model with film and intraparticle diffusions being the essential rate-controlling steps. The activation energy of adsorption (EA) was determined as--1.69 kJ mole(-1). Using the thermodynamic equilibrium coefficients obtained at different temperatures, the thermodynamic constants of adsorption (deltaG degrees, deltaH degrees, and deltaS degrees) were also evaluated.     

First study of congener group patterns and concentrations of short- and medium-chain chlorinated paraffins in fish from the North and Baltic Sea

This study presents the first investigation of concentrations and congener group patterns of short- (SCCPs) and medium-chain chlorinated paraffins (MCCPs) in fish from the North and Baltic Sea. North Sea dab, cod and flounder were studied. High resolution gas chromatography (HRGC) coupled to low resolution mass spectrometry (LRMS) in the electron capture negative ionization mode (ECNI) was employed. Good linearity (R2>0.993, 7 measuring points) was achieved between 1 and 100 ng/g of CP mixtures for SCCPs and MCCPs. The limits of detection were 0.5-1 ng/microl of CP mixture for the major congener groups of SCCPs and MCCPs. A clean-up comprising fat extraction, adsorption chromatography on silicagel impregnated with concentrated sulphuric acid and adsorption chromatography on Florisil was employed to avoid interferences from other polychlorinated compounds. Recoveries of CPs in spiked samples ranged between 80% and 100%. Accuracy was controlled with spiked samples and deviated not more than 10% from the expected values. Quantification was performed with standards of an average chlorine content as close as possible to that of the samples (SCCPs: 59-62%, MCCPs: 53-58%). SCCP concentrations ranged between 19 and 286 ng/g liver wet weight (ww), MCCP concentrations were comparable with a range of 25-260 ng/gww. Congener group patterns were also determined and discussed. In samples from the Baltic Sea the SCCP congener pattern was similar to that of commercial SCCP mixtures or C13 congeners were most abundant. In samples from the North Sea a higher relative abundance of C10 congeners was observed.